Your cart is currently empty!
Dobinsons Front 2.2″ IMS Shocks Pair for 60 70 71 73 74 75 77 Series Land Cruisers
- Front IMS shocks to suit 60 62 70 71 73 74 75 77 Series Landcruisers up to 1999 models with leaf spring front suspension
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 598mm extended, 389mm compressed
Original price was: $580.00.$493.00Current price is: $493.00.
In StockDescription
Pair of FRONT Dobinsons IMS59-50701 internal reservoir monotube shocks for the front of many different Toyota Landcruiser variants, all 60/62 and 70 series up until 1999 models. Best for vehicles carrying heavy constant weight of 200LBS or more. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.
Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
15 reviews for Dobinsons Front 2.2″ IMS Shocks Pair for 60 70 71 73 74 75 77 Series Land Cruisers
You must be logged in to post a review.
You may also like…
-
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks Pair
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
- SOLD IN PAIRS
- Now comes with a longer hose and different mounting instructions
(18 reviews)
Stephen (verified owner) –
Good quality, really nice.
Brian (verified owner) –
*****
Bryan (verified owner) –
Great description on the page, easy to understand what I was buying.
Kevin (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Joshua (verified owner) –
*****
Shawn (verified owner) –
5 Stars!!
Robert (verified owner) –
Value for money, super satisfied.
Brian (verified owner) –
Would definitely buy from this site again.
Richard (verified owner) –
I received it really fast.
Jeremy (verified owner) –
Very fast delivery.
Edward (verified owner) –
I received it really fast.
Adam (verified owner) –
Very fast delivery.
Kenneth (verified owner) –
Value for money, super satisfied.
Jeremy (verified owner) –
Just what I needed.
Andrew (verified owner) –
Just what I needed.