Dobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+

Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
Fully rebuildable and re-valvable
SOLD IN PAIRS
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Features clip adjustment levels for fine tuning of lift height
Recommended to run with Dobinsons coils
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
Full 2 year limited warranty, no set rebuild time period
Standard coil seat height is 231mm (9.07″)
Photos for illustration purposes

Original price was: $720.00.Current price is: $612.00.

In Stock

SKU: IMS09-60178 Categories: Dobinsons, Exceptions, IMS Monotube, Sequoia 2nd Gen (2008-2022), Shocks + Struts – Sequoia 2nd Gen, Silverado 1500 (2019-2024), Struts and Shocks, Suspension Brand: Dobinsons Spring & Suspension

Description
Reviews (0)

Description

Pair of front Dobinsons IMS09-60178 Internal Reservoir Monotube shocks for Chevrolet Silverado 1500 and GMC Sierra 1500 2019-2024. They do come with new rubber bushings and required washers for installation. Select Dobinsons coil springs based on desired lift height and load capacity. Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.

Dobinsons IMS09-60178 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS09-60178 IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

For a video describing the features of the Dobinsons IMS Shocks and to get a hands on view of how they look, Check out this video here: https://youtu.be/Npfx40VD3kM

Vehicle Fitment:

2019 Chevy Silverado 1500 Front Struts
2020 Chevy Silverado 1500 Front Struts
2021 Chevy Silverado 1500 Front Struts
2022 Chevy Silverado 1500 Front Struts
2023 Chevy Silverado 1500 Front Struts
2024 Chevy Silverado 1500 Front Struts

2019 GMC Sierra 1500 Front Struts
2020 GMC Sierra 1500 Front Struts
2021 GMC Sierra 1500 Front Struts
2022 GMC Sierra 1500 Front Struts
2023 GMC Sierra 1500 Front Struts
2024 GMC Sierra 1500 Front Struts

Reviews

There are no reviews yet.

Be the first to review “Dobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+”

You must be logged in to post a review.

Related products

Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
Rated 5.00 out of 5
(6 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Tundra 2nd Gen (2007-2021)
On Sale All November!!
Dobinsons Rear U-Bolts for Toyota Tundra 2007-21 (UB59-437K) (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- Photo for illustration purposes. These are square at the top
Rated 5.00 out of 5
(7 reviews)
Original price was: $90.00.Current price is: $76.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boots to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
- Available in Yellow or Black
- Sold in pairs
Rated 5.00 out of 5
(6 reviews)
Original price was: $310.00.Current price is: $263.50. Select options
Sale!
Dobinsons
On Sale All November!!
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5
(12 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart