Your cart is currently empty!
Dobinsons Jeep JL JT Front Track Bar Axle Bracket Kit (3–4.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT with 3.0-4.5″ of Lift
- The Dobinsons Jeep JL/JT Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Prevents Coil Bowing
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Black Powder Coat finish
- Drilling is required
$75.00
In Stock
SKU: PR29-432K
Categories: Caster and Alignment, Dobinsons, Gladiator JT (2020-2024+), JL Wrangler (2018-2024+), Performance Upgrades - Gladiator, Performance Upgrades - JL Wrangler, Suspension
Brand: Dobinsons Spring & Suspension
Description
The Dobinsons Jeep JL Wrangler and JT Gladiator Front Track Bar Axle Bracket Kit corrects steering geometry eliminate bump steer and other front-end issues on lifted JL Wrangler/Unlimited and JT Gladiator models. The bracket suits 3-4.5″ of lift, and the bracket’s multiple mounting locations allows neutral lateral alignment of the front axle. Bolt-on bracket mounts to the front axle.
Fitment:
- 2018 Jeep Wrangler
- 2019 Jeep Wrangler
- 2020 Jeep Wrangler
- 2021 Jeep Wrangler
- 2022 Jeep Wrangler
- 2023 Jeep Wrangler
- 2018 Jeep Gladiator
- 2019 Jeep Gladiator
- 2020 Jeep Gladiator
- 2021 Jeep Gladiator
- 2022 Jeep Gladiator
- 2023 Jeep Gladiator
9 reviews for Dobinsons Jeep JL JT Front Track Bar Axle Bracket Kit (3–4.5” Lift)
You must be logged in to post a review.
You may also like…
-
Bump Stops & Spacers
Teraflex JL: Progressive Bump Stop Kit – Front & Rear (0-4.5″ Lift)
- JL specific tuned for high-speed performance
- Foam Progressive Bump Stops simply pop-in to the existing factory locations
- Replaces factory foam bump stops
- Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
- Absorbs large impact energy progressively during compression to prevent bent axle tubes
- Prevents damage to suspension components, shock absorbers, and fenders
- Quiet movement and function (no pad-slap clunk)
- Maintains progressive nature during all conditions
- Will not fade or dissipate under extended heavy use
- Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
- Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.)
- Subzero temperature flexibility reduces fatigue
- Compatible w/ all suspension systems that retain factory axle spring mounting locations
- Maintenance-free, all composite construction
- Simple bolt-on installation
- Patented technology
- Limited lifetime warranty
- Installation Instructions
(9 reviews) -
Teraflex
Teraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift)
- The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited models
- Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
- Bolt-on bracket mounts to the rear axle
- Drilling is required
- Installation Instructions
(9 reviews)
Related products
-
4Runner 5th Gen (2010-2024)
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews)
Jason (verified owner) –
Great description on the page, easy to understand what I was buying.
Kenneth (verified owner) –
I received it really fast.
Daniel (verified owner) –
Good quality, really nice.
Eric (verified owner) –
Good quality, really nice.
Christopher (verified owner) –
Very good customer service, super friendly.
Paul (verified owner) –
Just what I needed.
Eric (verified owner) –
Would definitely buy from this site again.
Michael (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jeffrey (verified owner) –
Great description on the page, easy to understand what I was buying.