Sale!
On Sale All November!!

Dobinsons Lexus LX600 IMS Lift Kit (0-3″ Lift)

  • Suits Lexus LX600 from 2022 onwards
  • Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
  • Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
  • Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
  • Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
  • Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
    • Front: 20.25″
    • Rear: 22.5″

Original price was: $1,910.00.Current price is: $1,623.50.

In Stock
Choose Front Coils for Lift Height and Added Weight
Specs are for 3.3L Diesel and 3.5L Gasoline Engine
May lift more with a lighter engine
C59-818 (Stock Height) with 110-220lb Constant Load
C59-820 (50mm-2") Stock Load
C59-822 (50mm-2") 110-150lb Constant Load
C59-824 (50mm-2") 150-220lb Constant Load
C59-844 (75mm-3") Stock Load
C59-846 (75mm-3") 120-220lb Constant Load
Front Struts
IMS struts have adjustable coil seats, allowing for lift heights of up to 3", and also being able to fine tune any vehicle lean that may occur. To get get more lift than the listed coil height, the coil seat on the IMS struts will be raised accordingly. Put notes in your order at checkout letting us know what height you want them set at, if we are assembling them prior to shipping
Choose Rear Coils for Lift Height and Added Weight
C59-817V (10mm - 0.5") Stock Load
C59-819V (30mm - 1.2") 0-110lb Constant Load
C59-821V (30mm - 1.2") 220-440lb Constant Load
C59-823V (30mm - 1.2") 550-880lb Constant Load
C59-825V (30mm - 1.2") 880-1000lb Constant Load
C59-851V (50mm - 2") 0-110lb Constant Load
C59-853V (50mm - 2") 550-880lb Constant Load
Rear Shocks
IMS59-60441 - IMS non-resi monotube shocks
Add New Strut Mounts?
If you want to add new front strut top mounts so you don't have to separate the old coilovers and reuse the mounts, add that here
Add Front Strut Assembly?
If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here
Add Upper Control Arms (UCA's)?
Running new UCA's will allow for the best wheel alignment, as well as steering control, ride quality, and articulation
Add Front Bump Stops?
If you regularly offroad a lot and risk bottoming out the front end, upgraded high quality bump stops are recommended
Add Rear Bump Stops?
If you regularly offroad a lot and risk bottoming out the rear end, upgraded high quality bump stops are recommended
Add Rear Panhard Rod?
Lifting the rear 2" or more can lead to the axle shifting to one side, and this adjustable panhard rod can correct that. It's also considerably larger and stronger than stock for less deflection and will keep the axle in position better than stock. Can be used at any lift height
Add Rear Lower Control Arms?
Dobinsons adjustable rear lower control arms allow you to dial in the pinion angle perfectly while also increasing the strength with heavy wall thickness steel arms, the strength you need for heavy offroading.
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors. X-Line kit requires 18" wheels for caliper clearance

Description

Dobinsons Lexus LX600 IMS suspension system for the 2022+ Lexus LX600.  All options of coils are listed here on the page, so you can match what lift height you want with what weight you carry.  Select the appropriate parts from the drop down menus to get the parts you’d like suited best to your needs.

How to choose Dobinsons Lexus LX600 suspension parts?  Based on what constant accessory weight you have on your vehicle, you will get different lift heights.  If you have things like bumpers, winches, roof rack, rear bumper, etc, all parts that are permanently mounted to your land cruiser, then that is constant weight.  Select your coil springs to suit the constant weight and desired lift height.

Many land cruiser owners choose to lift the rear less than the front to reduce the rake from front to rear.  Lexus LX600 come with a considerable rake (the rear being much higher), so by choosing 2″ front for example and 1.5″ rear, you would help level out the vehicle without it being so tall in the rear.

Dobinsons Lexus LX600 Suspension is Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

To see all individual products for the 300 Series, click this link here:  https://exitoffroad.com/product-category/lexus/lx600/

Vehicle Fitment:

2022 Lexus LX600

2023 Lexus LX600

2024 Lexus LX600

Reviews

There are no reviews yet.

Be the first to review “Dobinsons Lexus LX600 IMS Lift Kit (0-3″ Lift)”