You may be interested in…
-
ExceptionsShips FREE !!
within 48 US StatesWarn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
4Runner 5th Gen (2010-2024)
Dobinsons GS59-700 Front Struts | FJ Cruiser 4Runner GX460 2010-2024
- Dobinsons GS59-700 front struts for 2010-2016 Toyota FJ Cruiser, 2010-2024 Toyota 4Runner, Lexus GX460, and Prado 150 – twin tube design
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-700 Specifications: 555mm extended, 432mm compressed, 50mm body size
$350.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
$720.00 Add to cart -
Exceptions
Dobinsons Rear Dual Roller Drawer Kit – 36 x 40 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide on left side
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 36″ Long x 40″ Wide x 10″ High, requires drilling
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$1,465.00 Select options -
Accessories
Dobinsons Single Drawer – Universal Mount – Medium Size
- Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address. Ground shipping isn’t available due to potential product damage
$800.00 Select options -
Factor 55Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYFactor 55 ProLink Shackle Mount
- 5/8 inch diameter 6Al-4V titanium double shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips and protects fairleads and prevents rattling, also protects alloy fairleads and cushions line stowage
- Precision machined from 6061-T6 Kaiser Aluminum round bar
- 1.2 inch shackle tab thickness reduces “shackle rattle”
- Works with steel or synthetic rope up to 3/8” diameter and eyes equipped with standard or tube thimbles up to 3/8” diameters.
- The rope eye is retained in the ProLink with a 5/8”-diameter grade 6AI-4V grade V
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Max load rating: 16,000 lbs.
- Weight: 24 oz
- Engineered, Tested, and Made in USA. Patent pending
$157.00 Select options -
Suspension
Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Interior mold is hex shaped
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons MRA59-A574 3-Way Adjustable MRA Extended Travel Front Struts
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, suitable for 2 – 3.5″ of lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Extended Travel – 575mm at full extension, 420mm compressed
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart -
Tacoma 3rd Gen (2016-2023)Ships FREE !!
within 48 US StatesDirt King Performance Tacoma Lower Control Arms for 2016-2023
- Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$1,849.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesWarn 103253 VR Evo 10-S Winch 10K | Synthetic Rope
- Winch; VR10-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
- Black Tactical Look Puts You At The Head Of The Off-Road Pack
- Waterproof Albright® Contactor Control For The Ultimate In Reliability
- One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
- Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
- Powerful, Efficient Series-Wound Motor
- Best-In-Class Load-Holding Cone Brake For Superior Control
- Limited 7 Year Warranty
-
Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 90 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 1000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per Minute At 1000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
$864.99 Add to cart -
Wheels
Warn 106684 5 Lug Epic Wheel Hubs Center Cap – Grey
- Suits Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- Grey Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 5×127
- Installation Type: Bolt-On
- Style: Closed
- Color: Grey
- Quantity: Single
- Bolt Pattern (IN): 5×5.00
- Material: Plastic
- Estimated Install Time (Hours): 0.25
Original price was: $27.29.$24.00Current price is: $24.00. Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
$269.36 Add to cart -
WheelsShips FREE !!
within 48 US StatesWarn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
WinchesShips FREE !!
within 48 US StatesWarn 103252 VR Evo 10 Winch 10K | Steel Cable
- Winch; VR10; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Wire Rope; Roller Fairlead; Wired Remote; Planetary Gear Drive
-
Durable, One-Piece Cast-Aluminum Tie-Plate For Added Strength And Durability
- High-Performance Albright Contactor Delivers Maximum Reliability
- IP68-Rated Waterproof Winch Construction Keeps The Elements Out
- Control Packs Can Be Relocated For Low-Profile Installations
- Two-In-One Remote With Wired AND Wireless Options For Ease Of Use And Versatility
- A Powerful Series-Wound Motor And Planetary Gear Train Deliver Faster Line Speed Under Load, With Lower Amp Draw
- Limited Lifetime Warranty On Mechanical Components And Limited 7 Year Warranty On Electrical Components
- Warn Warranty information is all listed here: https://www.warn.com/warranties
- Warn 103252 Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Warn 103252 Line Length (FT): 90 Feet
- Line Material: Steel
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 10000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Roller
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per minute At 10000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 0.354 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
$649.99 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50700 Front IMS Struts | 2010+ 4Runner FJ Cruiser GX460 (0-2.5″ Lift)
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 560mm extended, 420mm compressed
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
$650.00 Add to cart -
Dobinsons
Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
$120.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
Factor 55Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYFactor 55 FlatLink E (Expert) Shackle Mount
- Large pear-shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points.
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Precision machined from 6000 series billet aluminum, Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
- Works with common 3/4” shackles (pin and bow end), soft shackles up to 3/4”
- Less than 1.75” of thick, when folded flat
- Maximum Load: 16,000 lbs., Ultimate failure : greater than 40,000lbs
- Compatible with all roller fairlead license plate mounting brackets
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage, and eliminates hook rattle and fairlead damage
- Simple snap ring removal for shear pin
- Weight: 26 oz.
$167.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesWarn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Factor 55Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYFactor 55 ProLink E (Expert) Shackle Mount
- Unique shape offers increased versatility allowing for increased rigging options
- 5/8” diameter 6AI-4V titanium double-shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Connects to either the pin or bow end of common ¾” screw pin shackles, compatible with steel or synthetic rope up to 3/8”
- Connects to the pin ends of 7/8” and 1” screw pin shackles
- Fits over most OEM tow hooks
- Maximum load: 16,000 lbs, Ultimate Strength: 40,000 lbs
- Weight: 32 oz
- Engineered, Tested, and Made in USA. Patent pending
$209.00 Select options -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
$5.00 Add to cart -
Factor 55Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYFactor 55 FlatLink Multimount
- Multiple shackle interface for bridle and off-camber towing
- Lightweight – Precision CNC machined 6000 series aluminum
- No splicing required – titanium double shear pin design
- Designed for both steel cables and synthetic winch ropes
- Integrated EPDM rubber pads for fairlead protection
- Foldable – 1.75” thick (Compatible with all fairlead license plate mounting brackets)
- Oval opening connects to either the pin or bow end of common ¾” screw pin shackles and pin ends of 7/8” and 1” screw pin shackles
- 5/8” diameter 6AI-4V titanium double shear pin
- For rope and cable diameters up to 3/8’’
- Fits over most OEM tow hooks
- 2” thick when folded flat
- Max load: 16,000 lbs., Ultimate Strength: 40,000 pounds
- Weight: 32 oz
- MADE IN USA
$229.00 Select options -
Factor 55Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYFactor 55 FlatLink Shackle Mount
- Double-shear pin and internal snap ring for an ultrasecure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter and works with common 3/4” shackles (pin and bow end) or soft shackles up to 3/4”
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Less than 1.75” of thick, when folded flat
- Max load rating: 16,000lbs, Ultimate failure : greater than 40,000lbs
- Weight: 23 oz.
- Engineered, Tested, and Made in USA. Patent pending
$146.00 Select options -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Excluded
Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
From $1,845.00 Select options -
Rear Drawers
Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Photos for illustration purposes and may not be actual size of product for this product page
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
$1,465.00 Select options -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
Tacoma 2nd Gen (2005-2015)Ships FREE !!
within 48 US StatesDirt King Performance Tacoma Lower Control Arms for 2005-2015
- Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$1,849.00 Add to cart -
WheelsShips FREE !!
within 48 US StatesWarn 104489 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Excluded
Dobinsons Single Drawer – Universal Mount – Large Size
- Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Regular Ground shipping isn’t available due to potential product damage
$800.00 Select options -
SPC
SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)
- Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
- These cams are designed to install in the lower control arms for camber and caster adjustment
- They replace the original non-adjustable lower control arm bolts
- Front Adjustment range: Camber/Caster ±2.00°
- Installation time: .3 hr/side
- The purchase includes 2 pairs, enough for 1 vehicle
- Installation Guide
$90.00 Add to cart -
Recovery
MAXTRAX Flat Rack Mounts with T-Bolts
- Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
- Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
- Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
- Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
- Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
- SOLD IN PAIRS
$149.99 Add to cart -
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
$135.00 Add to cart -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)
- Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
- Sold in pairs
- Each pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
$870.00 Add to cart -
WheelsShips FREE !!
within 48 US StatesWarn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
Cart totals
Subtotal | $33,492.84 |
---|---|
Shipping |
Shipping to FL. |
Tax | $2,512.08 |
Total | $37,005.92 |