Your cart is currently empty!
Dobinsons Rear Coil Spring Options for Toyota 5th Gen 4Runner 2010-2024 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 1.25-1.5″ with stock weight
- C59-505 – 1.75-2.0″ with stock weight
- C59-325 – 2.25-2.5″ with stock weight
- C59-327 – 2″ with 200-400lbs weight
- C59-329 – 2″ with 500-800lbs weight
- C59-331 – 2″ with 800-1200lbs weight (teal only)
- C59-675V – 3″ long travel, stock weight
- C59-677V – 3″ long travel, 200-400lbs weight
- C59-701V – 3″ long travel, 500-600lbs weight
- C59-749V – 3″ long travel, 800-1000LBS super extra heavy
- C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight
- Coil specs are down below
From $270.00
In StockSelect Rear Coils
SKU: 5G4RREARCOILS
Categories: 4Runner 5th Gen (2010-2024), Coil Springs, Coil Springs - 5th Gen 4Runner, Dobinsons, Suspension
Brand: Dobinsons Spring & Suspension
Description
Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it.
Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
C59-323 – Stock height up to 1/2″ Lift – 375mm, 17mm wire, 220LB Rate
C59-599 – 1.25-1.5″ with stock weight – 390mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
C59-505 – 1.75-2.0″ with stock weight – 405mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
C59-325 – 2.25-2.5″ with stock weight – 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
C59-327 – 2″ with 200-400lbs weight – 410mm free height, 18mm wire diameter, 271LBF/IN Spring Rate
C59-329 – 2″ with 500-800lbs weight – 410mm free height, 18mm wire diameter, 286LBF/IN Spring Rate
C59-331 – 2″ with 800-1200lbs weight (teal only) – 410mm, 19mm wire, 349LB Rate
C59-675V – 3″ long travel, stock weight – 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
C59-677V – 3″ long travel, 200-400lbs weight – 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
C59-701V – 3″ long travel, 500-600lbs weight – 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
C59-749V – 3″ long travel, 800-1000LBS super extra heavy – 520mm free height, 18mm wire, 198-300LB variable rate, usually around 270LB at loaded height
C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight
Dobinsons Spring & Suspension™ proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from their state of the art manufacturing facility in Central Queensland, Australia.
We proudly boast one of the worlds largest range of coil springs, including raised height and heavy duty 4WD springs, lowered performance passenger car springs, O.E. replacement springs and heavy duty springs for commercial vehicles.
All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag, and ensure they meet and maintain the required specifications. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Our design engineers utilize the latest coil spring design programs to ensure each spring meets or exceeds the design requirements, to achieve maximum working life. These state-of-the-art design programs are crucial when designing variable/progressive rate springs, ensuring laden and unladen spring rates are correct, providing the best possible ride comfort and handling.
NOTE: Dobinsons coils are aqua in color, unless otherwise specified here.
Vehicle Fitment:
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
3 reviews for Dobinsons Rear Coil Spring Options for Toyota 5th Gen 4Runner 2010-2024 – Pair
You must be logged in to post a review.
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Dobinsons
Dobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boots to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
- Pin mount top, eyelet lower
- Available in Yellow or Black
- Sold in pairs
(6 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page
Joshua (verified owner) –
It’s exactly what I wanted.
Joshua (verified owner) –
Great description on the page, easy to understand what I was buying.
Ryan (verified owner) –
5 Stars!!