Your cart is currently empty!
Dobinsons SC19-009 Pair of Strut Top Plates
- Made specifically for the 4×4 2011-2018 International model Ford Ranger PX and 2011-2020 Mazda BT-50
- Not tested on any USA-spec trucks
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Installation Instructions
$120.00
In StockDescription
Dobinsons SC19-009 is Made specifically for the 4×4 2011-2018 International model Ford Ranger PX and 2011-2020 Mazda BT-50.
Includes all new hardware, washers, and bushings for a completely new installation.
Dobinsons have a range of coil Strut Top Caps available for most popular 4×4 models. These can be used to replace the original worn strut top caps or can be fitted to coil struts with coil springs allowing a complete strut assembly that is a simple install. These come with a built-in top bushing (same as OE equipment) and new studs installed with nuts supplied.
For a faster installation process, purchase your new Dobinsons Struts, Coils, and Strut Caps all new and have them assembled prior to removing your original strut assembly from the vehicle. By using a new Strut Cap, you won’t have to dismantle the original strut and coil assembly to re-use the original Strut Cap, saving time.
Dobinsons SC19-009 Vehicle Fitment:
2011 Ford Ranger International Model
2012 Ford Ranger International Model
2013 Ford Ranger International Model
2014 Ford Ranger International Model
2015 Ford Ranger International Model
2016 Ford Ranger International Model
2017 Ford Ranger International Model
2018 Ford Ranger International Model
2011 Mazda BT-50
2012 Mazda BT-50
2013 Mazda BT-50
2014 Mazda BT-50
2015 Mazda BT-50
2016 Mazda BT-50
2017 Mazda BT-50
2018 Mazda BT-50
2019 Mazda BT-50
2020 Mazda BT-50
8 reviews for Dobinsons SC19-009 Pair of Strut Top Plates
You must be logged in to post a review.
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2012 to mid 2016
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your local paint shop
- Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(6 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesDobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope
- 12,000 Capacity
- 6.5HP Series Wound Motor
- 216:1 Gear Reduction
- 57 LBS Weight
- 10×4.5″ Mounting Pattern
- 6.3 x 8.3 x 21.5″ Overall Dimensions
- 64 x 224mm Drum, Automatic Braking Action
- 3 Stage Planetary Gears
- Plug in Control Range of 10 FT
- Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
- Sealed Solenoid Box, More Powerful
- Easy Quick Flop Clutch
- Improved Casings
- Motor Housing Breather
- Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)
(11 reviews)
David (verified owner) –
Good quality, really nice.
Matthew (verified owner) –
Just what I needed.
Brian (verified owner) –
This is my go-to now for off road parts.
Eric (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jesse (verified owner) –
Very good customer service, super friendly.
Mark (verified owner) –
Great description on the page, easy to understand what I was buying.
William (verified owner) –
5 Stars!!
Paul (verified owner) –
Would definitely buy from this site again.