Cannot contact the gateway at this time.

Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)

Name: Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)
Brand: Dobinsons Spring &amp; Suspension
SKU: TB21-1547
Availability: InStock
Rating: 5.00 (2 reviews)

Rated 5.00 out of 5 based on 2 customer ratings

(2 customer reviews)

You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
TB21-1547 are 1000mm (39.37″), 26mm bar thickness
Increased spring rate to improve handling and lift front end
Powder coated black for a long lasting finish
Replaces OE torsion bars without modification
Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride

$305.00

In Stock

SKU: TB21-1547 Categories: Amigo, Dobinsons, Suspension, Torsion Bars Brand: Dobinsons Spring & Suspension

Description
Reviews (2)

Description

Dobinsons Heavy Duty Torsion Bar set for Isuzu Amigo TB21-1547

You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.

Here are the options and total length of each.

TB21-1547 – 1000mm (39.37″)

TB21-1549 – 1220mm (48.03″)

TB21-1550 – 1145mm (45.08″)

Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.

Dobinsons Isuzu Amigo torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Dobinsons TB21-1547 Isuzu Amigo torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

A thick durable powdercoat provides protection against corrosion.

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their Isuzu Trooper torsion bars directionally preset and scragged to prevent sagging and breakage.

Dobinsons TB21-1547 heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL

When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

INCREASED SPRING RATE

Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Simple Fitment

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

Directionally Preset & Scragged

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.