Your cart is currently empty!
Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu + Honda – 1145mm (45.08″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1550 are 1145mm (45.08″), 30mm bar thickness
- Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
$355.00
In StockDescription
Dobinsons Heavy Duty Torsion Bar set for Isuzu Amigo TB21-1550. Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first. Also suits Isuzu D-Max 2003-2011.
You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
Here are the options and total length of each.
TB21-1547 – 1000mm (39.37″)
TB21-1549 – 1220mm (48.03″)
TB21-1550 – 1145mm (45.08″)
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons Isuzu Amigo torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB21-1550 Isuzu Amigo torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit. These Honda Passport torsion bars may also suit your vehicle, be sure to measure your stock bar length before ordering.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their Isuzu Trooper torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons TB21-1550 heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATE
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Potential Vehicle Fitment:
1999 Honda Passport
2000 Honda Passport
2001 Honda Passport
2002 Honda Passport
1995 Isuzu Amigo
1996 Isuzu Amigo
1997 Isuzu Amigo
1998 Isuzu Amigo
1999 Isuzu Amigo
2000 Isuzu Amigo
2001 Isuzu Amigo
2002 Isuzu Amigo
2002 Isuzu D-Max
2003 Isuzu D-Max
2004 Isuzu D-Max
2005 Isuzu D-Max
2006 Isuzu D-Max
2007 Isuzu D-Max
2008 Isuzu D-Max
2009 Isuzu D-Max
2010 Isuzu D-Max
2011 Isuzu D-Max
4 reviews for Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu + Honda – 1145mm (45.08″)
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R), also fit other International trucks and SUV’s
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews)
Richard (verified owner) –
It’s exactly what I wanted.
Gregory (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Bradley (verified owner) –
Good quality, really nice.
Jacob (verified owner) –
I received it really fast.