Your cart is currently empty!
Dobinsons TB45-1458 Torsion Bar Pair for Pathfinder 1987-1995
- Suits the following vehicles:
- Nissan Pathfinder WD21 1987-1995
- Nissan Terrano R20 1993-2006
- TB45-1458 measure 1232 mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
$475.00
In StockDescription
Dobinsons TB45-1458 Torsion bar set measures 1282mm in total length is suitable for the following vehicles:
- Nissan Pathfinder WD21 1987-1995
- Nissan Terrano R20 1993-2006
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons TB45-1458 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB45-1458 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Vehicle Suitability:
1987 Nissan Pathfinder
1988 Nissan Pathfinder
1989 Nissan Pathfinder
1990 Nissan Pathfinder
1991 Nissan Pathfinder
1992 Nissan Pathfinder
1993 Nissan Pathfinder
1994 Nissan Pathfinder
1995 Nissan Pathfinder
1993 Nissan Terrano
1994 Nissan Terrano
1995 Nissan Terrano
1996 Nissan Terrano
1997 Nissan Terrano
1998 Nissan Terrano
1999 Nissan Terrano
2000 Nissan Terrano
2001 Nissan Terrano
2002 Nissan Terrano
2003 Nissan Terrano
2004 Nissan Terrano
2005 Nissan Terrano
2006 Nissan Terrano
4 reviews for Dobinsons TB45-1458 Torsion Bar Pair for Pathfinder 1987-1995
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
DobinsonsDobinsons Front 30mm Coil Spacer (Single)
- Suits:
- Land Cruiser 80 Series and Lexus LX450
- Range Rover 1971-1988
- Land Rover Discovery Series I 1991-1999
- Defender 90 1984-1990
- Defender 110 1984-1992
- Defender 110 + 130 1992-2001
- Defender 110 + 130 2007-2019
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) - Suits:
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(9 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Replacement Ball Joints can be ordered here
(8 reviews)
Stephen (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Ryan (verified owner) –
I received it really fast.
Nathan (verified owner) –
5 Stars!!
Jose (verified owner) –
Very good customer service, super friendly.