Your cart is currently empty!
Dobinsons Toyota Pickup/Hilux 1986-1995 Rear Polyurethane Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
$105.00
In Stock
EAN: 9332670063186
SKU: PB59-1084K
Categories: Bushings, Dobinsons, Hilux LN107 LN108 RN106 (1991-2005), Pickup (1988-1995), Suspension
Brand: Dobinsons Spring & Suspension
Description
Dobinsons Spring & Suspension rear polyurethane leaf spring bush kit for 1988 to 1995 Toyota Pickup 4×4 models. Replaces OE bushes with high quality polyurethane for maximum vibration dampening and best cabin comfort. Bushes have unique internal diamond grease traps to maximize bush life and reduce squeaking or noise. These replace the OE bushing, or the bushing that is supplied with some leaf spring manufacturers which are prone to squeaking. Kit contains 6 bushes, for the fixed end and both shackle ends of each leaf spring (6 positions total). Only one bush kit is required per vehicle.
It is recommended to add Dobinsons greasable pin (bolt) kit to the bushings so that you can add grease to the inside of the bushings without having to disassemble the suspension. Adding grease between the pivot points reduces noise, helps maintain free movement of the suspension and also maximizes bushing life so that dirt and grit doesn’t cause the poly bushings to wear out prematurely.
3 reviews for Dobinsons Toyota Pickup/Hilux 1986-1995 Rear Polyurethane Leaf Spring Bush Kit
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews)
Related products
-
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page
Steven (verified owner) –
Good quality, really nice.
Joshua (verified owner) –
Great description on the page, easy to understand what I was buying.
Ryan (verified owner) –
It’s exactly what I wanted.