Your cart is currently empty!
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
$227.95
In StockDescription
Tundra and Tacoma AAL Set
The ICON Vehicle Dynamics Progressive Tundra and Tacoma AAL Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
- Warranty Info
What is a Tundra or Tacoma AAL (Add-A-Leaf)?
An add-a-leaf (AAL) is an extra leaf added to a vehicle’s leaf spring pack to increase its carrying capacity, reduce sway, or increase ride height. AAL kits are a more economical and easier-to-install alternative to replacing the existing leaf springs. Depending on the vehicle, adding a leaf can raise the rear of a vehicle by 0.5–3 inches.
Vehicle Fitment:
1995 Toyota Tacoma AAL Set
1996 Toyota Tacoma AAL Set
1997 Toyota Tacoma AAL Set
1998 Toyota Tacoma AAL Set
1999 Toyota Tacoma AAL Set
2000 Toyota Tacoma AAL Set
2001 Toyota Tacoma AAL Set
2002 Toyota Tacoma Add-A-Leaf Set
2003 Toyota Tacoma Add-A-Leaf Set
2004 Toyota Tacoma Add-A-Leaf Set
2005 Toyota Tacoma Add-A-Leaf Set
2006 Toyota Tacoma Add-A-Leaf Set
2007 Toyota Tacoma Add-A-Leaf Set
2008 Toyota Tacoma Add-A-Leaf Set
2009 Toyota Tacoma Add-A-Leaf Set
2010 Toyota Tacoma Add-A-Leaf Set
2011 Toyota Tacoma Add-A-Leaf Set
2012 Toyota Tacoma Add-A-Leaf Set
2013 Toyota Tacoma Add-A-Leaf Set
2014 Toyota Tacoma Add-A-Leaf Set
2015 Toyota Tacoma Add-A-Leaf Set
2016 Toyota Tacoma Add-A-Leaf Set
2017 Toyota Tacoma Add-A-Leaf Set
2018 Toyota Tacoma Add-A-Leaf Set
2019 Toyota Tacoma Add-A-Leaf Set
2020 Toyota Tacoma Add-A-Leaf Set
2021 Toyota Tacoma Add-A-Leaf Set
2022 Toyota Tacoma Add-A-Leaf Set
2023 Toyota Tacoma Add-A-Leaf Set
1999 Toyota Tundra AAL Set
2000 Toyota Tundra AAL Set
2001 Toyota Tundra AAL Set
2002 Toyota Tundra AAL Set
2003 Toyota Tundra AAL Set
2004 Toyota Tundra AAL Set
2005 Toyota Tundra AAL Set
2006 Toyota Tundra AAL Set
Additional information
Weight | 38 lbs |
---|---|
Dimensions | 46 × 8 × 4 in |
7 reviews for Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
Rated 5.00 out of 5(17 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5(12 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
Rated 5.00 out of 5(12 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews)
Paul (verified owner) –
Value for money, super satisfied.
Adam (verified owner) –
*****
Jason (verified owner) –
Very good customer service, super friendly.
Jesse (verified owner) –
*****
Eric (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
This is my go-to now for off road parts.
Jacob (verified owner) –
Just what I needed.