Your cart is currently empty!
Sale!
On Sale All November!!
RCI Transfer Case Skid Plate | 1996-2002 4Runner
- Suits 3RD Gen Toyota 4Runner 1996-2002
- Protects third cross-member, transfer-case, and exhaust pipe
- Photos show this skid as well as others installed
- Built with 3/16″ CNC laser cut steel
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
- Also works in conjunction with the RCI Engine and Transmission Skid Plates
- Made in the USA.
Original price was: $249.99.$212.00Current price is: $212.00.
In Stock
SKU: T4R-96-TCASE
Categories: 4Runner 3rd Gen (1996-2002), Accessories, Armor, RCI Off Road, Skid Plates, Skid Plates - 3rd Gen 4Runner
Brand: RCI Offroad
Description
Protect your 3rd gen 4Runner from costly underbody damage with an RCI Offroad 4runner transfer case skid plate. An excellent addition or replacement for the cheap/light duty OEM skid plate. Integrates seamlessly with our front and t-case skid plates.
Complete the underbody protection of your 4Runner with a 4runner transfer case skid plate by RCI Offroad, the ultimate defense for all on and off-road hazards.
Built with 3/16″ CNC laser cut steel, this plate is custom fit to protect the transfer case of all 3rd generation 1996-2002 4Runners with premium quality, fit and finish.
KEY FEATURES
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
MADE IN USA
Vehicle Fitment:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Additional information
| Weight | 35 lbs |
|---|---|
| Dimensions | 28 × 23 × 4 in |
3 reviews for RCI Transfer Case Skid Plate | 1996-2002 4Runner
You must be logged in to post a review.
Related products
-
Sale!4Runner 3rd Gen (1996-2002)On Sale All November!!
Dobinsons 3rd Gen 4Runner IMS 2-2.5″ Lift Kit for 1996 to 2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Select from Teal, Red, or Black coil springs in the options below
(13 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Firestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Sale!4Runner 3rd Gen (1996-2002)On Sale All November!!
Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996-2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
(13 reviews)
Bryan (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Steven (verified owner) –
Very good customer service, super friendly.
Ryan (verified owner) –
It’s exactly what I wanted.