Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra Pair
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with new updated design maintenance-free ball joints
- Installation Instructions
- We offer replacement ball joints as well
$749.95
In Stock
EAN: 82642254904
SKU: 25490
Categories: Control Arms - Sequoia 2nd Gen, Control Arms - Tundra 2nd Gen, Exceptions, Sequoia 2nd Gen (2008-2022), SPC, Suspension, Tundra 2nd Gen (2007-2021), Upper Control Arms
Brand: SPC
Description
SPC 25490 Upper Control Arm Set. SPC has been at the forefront of designing and building rugged, adjustable front upper control arms for the demands of lifted vehicles. Trucks and SUVs run out of factory alignment adjustment when you install lift kits. With our patented design our upper control arms provide additional camber and caster change. Tough enough for off-road and racing applications, SPC arms are the industry standard.
SPC 25490 – Adjustable Upper Control Arms, Suits these vehicles:
2008-2022 Toyota Sequoia
2007-2021 Toyota Tundra
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and SpecRide™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
- Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting bushings, SPC’s arm gives you maximum droop travel.
- Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignmnet angles back to specification.
- Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
Adjustment range: Camber ±2.0°
Caster -1.0° to +3.0°
Installation time: .8 hr/side
Patent No. US 7,513,514
Vehicle Fitment:
2007 Toyota Tundra SPC Upper Control Arms
2008 Toyota Tundra SPC Upper Control Arms
2009 Toyota Tundra SPC Upper Control Arms
2010 Toyota Tundra SPC Upper Control Arms
2011 Toyota Tundra SPC Upper Control Arms
2012 Toyota Tundra SPC Upper Control Arms
2013 Toyota Tundra SPC Upper Control Arms
2014 Toyota Tundra SPC Upper Control Arms
2015 Toyota Tundra SPC Upper Control Arms
2016 Toyota Tundra SPC Upper Control Arms
2017 Toyota Tundra SPC Upper Control Arms
2018 Toyota Tundra SPC Upper Control Arms
2019 Toyota Tundra SPC Upper Control Arms
2020 Toyota Tundra SPC Upper Control Arms
2021 Toyota Tundra SPC Upper Control Arms
2008 Toyota Sequoia SPC Upper Control Arms
2009 Toyota Sequoia SPC Upper Control Arms
2010 Toyota Sequoia SPC Upper Control Arms
2011 Toyota Sequoia SPC Upper Control Arms
2012 Toyota Sequoia SPC Upper Control Arms
2013 Toyota Sequoia SPC Upper Control Arms
2014 Toyota Sequoia SPC Upper Control Arms
2015 Toyota Sequoia SPC Upper Control Arms
2016 Toyota Sequoia SPC Upper Control Arms
2017 Toyota Sequoia SPC Upper Control Arms
2018 Toyota Sequoia SPC Upper Control Arms
2019 Toyota Sequoia SPC Upper Control Arms
2020 Toyota Sequoia SPC Upper Control Arms
2021 Toyota Sequoia SPC Upper Control Arms
2022 Toyota Sequoia SPC Upper Control Arms
13 reviews for SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra Pair
You must be logged in to post a review.
Related products
-
Tundra 2nd Gen (2007-2021)
Dobinsons UB59-437K Rear U-Bolts (2 Pairs)
- These suit 2007-2021 Toyota Tundra, 2005-2023 Toyota Tacoma with thick/heavy leaf packs (like L59-112-R) and 2019-2023 Ford Ranger USA Spec with thick/heavy leaf packs (like L19-133-R)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- These are 210mm / 8.25″ in length
- Photo for illustration purposes. These are square at the top
(7 reviews) -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Dobinsons
Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
- Offered in Yellow or Black
(6 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews)
Daniel (verified owner) –
I received it really fast.
Mark (verified owner) –
Very good customer service, super friendly.
Benjamin (verified owner) –
I received it really fast.
Kenneth (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Kenneth (verified owner) –
Would definitely buy from this site again.
Jonathan (verified owner) –
Just what I needed.
Stephen (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jonathan (verified owner) –
I received it really fast.
Charles (verified owner) –
Value for money, super satisfied.
Gregory (verified owner) –
Great description on the page, easy to understand what I was buying.
Patrick (verified owner) –
Very good customer service, super friendly.
Chad (verified owner) –
Good quality, really nice.
Aaron (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.