Your cart is currently empty!
Suzuki Samurai Updated Transfer Case Front Output Shaft w/Pilot Bearing
- Suits 1986 to 1995 Suzuki Samurai
- Repeated popping of the front output shaft gear will result in gear failure and loss of power to the front axle
- In 1994 Suzuki upgraded the output shaft to a heavier duty version and stopped using the older style shaft that was prone to failure
- These later style shafts are a drop-in replacement for 1986-1993 transfer cases
- The front output gear can be installed without fully disassembling the transfer case
- Only the front output cover needs to be removed for installation
- Install the updated gear now and keep the older gear in your tool box as a trail spare
- NOTE: Includes high-quality output shaft pilot bearing
Original price was: $159.00.$135.15Current price is: $135.15.
In StockDescription
Suzuki Samurai Transfer Case Front Output Shaft with Output Bearing
Putting in lower transfer case gears and really getting on the throttle can sometimes damage the front output shaft. This results in a loud popping noise under load and is detrimental to the life of the output shaft. Repeated popping of the front output shaft gear will result in gear failure and loss of power to the front axle. In 1994 Suzuki upgraded the output shaft to a heavier duty version and stopped using the older style shaft that was prone to failure.
These later style shafts are a drop-in replacement for 1986-1993 transfer cases. You can see the difference in the picture above – the older version is on top and the updated version is shown below it. This upgrade is especially good for transfer cases that have lower-than-stock gearing in them because the lower the gear, the higher the torque load going through the gear.
The front output gear can be installed without fully disassembling the transfer case. Only the front output cover needs to be removed for installation. Install the updated gear now and keep the older gear in your tool box as a trail spare.
NOTE:Â Includes high-quality output shaft pilot bearing.
 WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Vehicle Fitment:
1986 Suzuki Samurai Transfer Case Output Shaft
1987 Suzuki Samurai Transfer Case Output Shaft
1988 Suzuki Samurai Transfer Case Output Shaft
1989 Suzuki Samurai Transfer Case Output Shaft
1990 Suzuki Samurai T-Case Gears
1991 Suzuki Samurai T-Case Gears
1992 Suzuki Samurai T-Case Gears
1993 Suzuki Samurai T-Case Gears
1994 Suzuki Samurai T-Case Gears
1995 Suzuki Samurai T-Case Gears
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, Ca 93727.
- Please place a clearly marked copy of the original invoice on the outside of the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
9 reviews for Suzuki Samurai Updated Transfer Case Front Output Shaft w/Pilot Bearing
You must be logged in to post a review.
You may also like…
-
SamuraiOn Sale All November!!
Suzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
SamuraiOn Sale All November!!
Suzuki Samurai 4.16:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.16 gears is 29″-30″
- Installation Instructions
(9 reviews)
Anthony (verified owner) –
Just what I needed.
Kevin (verified owner) –
Very fast delivery.
Justin (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Robert (verified owner) –
Very good customer service, super friendly.
Adam (verified owner) –
Very good customer service, super friendly.
Robert (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
David (verified owner) –
Just what I needed.
Brandon (verified owner) –
Would definitely buy from this site again.
Nathan (verified owner) –
This is my go-to now for off road parts.