Timbren ABSTOFLC1A 80 Series Front Bump Stops
Timbren ABSTOFLC1A 80 Series Front Bump Stops
FREE SHIPPING
within 48 US States

Timbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops

(13 customer reviews)
  • Suits Land Cruiser 80 Series and Lexus LX450
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • 1″ Extended Bump Stop over stock
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
  • NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame.  Adding nutserts may be required.
  • Click here for instructions

$269.36

In Stock
Share (0)
Total: 0 Total: 0
EAN: 809933008646 SKU: ABSTOFLC1A Categories: , , , , , Brand:

Description

The Timbren ABSTOFLC1A Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement.

Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

The Timbren ABSTOFLC1A replaces the front bump stops on the Landcruiser 80 Series from 1990 to 1997. Install a bump stop kit and experience the difference.

This kit is rated for 2000 lbs and has a bump-load capacity of 4800 lbs.

Timbren ABSTOFLC1A DESCRIPTION

Active Off-Road Bumpstops were designed to replace the original OEM bump stops in order to improve your off-road experience in 3 ways:

Provide Smooth Axle Engagement

Instead of the harsh jounce you get from regular bump stops, enjoy a much softer, smoother landing when your vehicle bottoms out.

Maintain Axle Travel

Active Off-Road Bumpstops will not limit axle travel, but allow full articulation of the suspension system

Deliver Greater Control Over The Vehicle

Remain in control of your off-road vehicle even during hard-to-handle situations on extreme terrain and at high speeds

WARRANTY

Timbren Active Off-Road Bumpstops come with a Lifetime Warranty which includes:

  • Defects in material and workmanship.
  • Damaged parts under normal use and service.

Warranty limitations include the following:

  • Warranty applies to original purchaser.
  • Warranty is not transferable to another vehicle.
  • Warranty does not include labor, freight or collateral damage.
  • Timbren reserves the right to inspect the failed part and ask for proof of purchase.
  • Timbren will not warrant the product in the event of alteration, misuse, overload, negligence or damage cause by others.

FAQ’S

What’s the difference between Active Off-Road Bumpstops and Timbren SES?

Active Off-road Bumpstops are used to soften the harsh impact when driving off-road. They also help avoid damage to the shock absorber and contact of larger tires with the fender. Timbren SES serve as helper springs to level the load and reduce roll and sway for vehicles carrying heavy loads.

My off-road vehicle has a suspension lift. Will Timbren’s Active Off-Road Bumpstops still work for me?

Absolutely! Timbren’s Active Off-Road Bumpstops are designed to work with your vehicle regardless of the lift kit you have installed. If you want them to engage sooner, simply order a spacer kit.

Should I install Active Off-Road Bumpstops on both the front and rear suspension of my vehicle?

We recommend both front and rear, especially when navigating rough, off-road terrain. Active Off-Road Bumpstops on all 4 corners of your vehicle will work together to give you a smooth, safe ride.

Do Active Off-Road Bumpstops require any maintenance?

No. Just like Timbren SES kits, Active Off-Road Bumpstops are also maintenance free.

What are Active Off-Road Bumpstops made from?

The Active Off-Road Bumpstops are made from natural rubber with all the unique characteristics inherent in rubber springs.

What is the warranty for Active Off-road Bumpstops?

All Active Off-Road Bumpstops come with a Lifetime warranty covering all replacement parts up until the time you sell your vehicle.

Compatible Vehicles

  • 1997 TOYOTA LAND CRUISER 80 SERIES 4WD
    1996 TOYOTA LAND CRUISER 80 SERIES 4WD
    1995 TOYOTA LAND CRUISER 80 SERIES 4WD
    1994 TOYOTA LAND CRUISER 80 SERIES 4WD
    1993 TOYOTA LAND CRUISER 80 SERIES 4WD
    1992 TOYOTA LAND CRUISER 80 SERIES 4WD
    1991 TOYOTA LAND CRUISER 80 SERIES 4WD
    1990 TOYOTA LAND CRUISER 80 SERIES 4WD
  • 1995 Lexus LX450
    1996 Lexus LX450
    1997 Lexus LX450

 

13 reviews for Timbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops

  1. Timothy (verified owner) –

    It’s exactly what I wanted.

  2. Brandon (verified owner) –

    Great description on the page, easy to understand what I was buying.

  3. Thomas (verified owner) –

    Would definitely buy from this site again.

  4. Justin (verified owner) –

    Value for money, super satisfied.

  5. Anthony (verified owner) –

    Very fast delivery.

  6. Jesse (verified owner) –

    Would definitely buy from this site again.

  7. Bradley (verified owner) –

    It’s exactly what I wanted.

  8. Gregory (verified owner) –

    Value for money, super satisfied.

  9. Jeffrey (verified owner) –

    *****

  10. Bryan (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  11. Nicholas (verified owner) –

    Very good customer service, super friendly.

  12. Mark (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  13. Jesse (verified owner) –

    I received it really fast.

Add a review

Related products

  • Sale! Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    Dobinsons

    Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
    • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    (14 reviews)
    Original price was: $405.00.Current price is: $344.25. Add to cart
  • Sale!
    Dobinsons Upper Control Arms UCAs
    On Backorder
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons MRA59-A220 UCA59-003K installed in Tacoma credit p8trit
    • Dobinsons IMS59-50220 UCA59-003K installed on Tacoma credit 1madmnky
    Suspension

    Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
    • Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
    • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Product Video
    • Also sold without ball joints
    • Replacement Ball Joints can be ordered Here
    (9 reviews)
    Original price was: $795.00.Current price is: $675.75. Add to cart
  • Sale! Dobinsons Upper Control Arms UCAs
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    Exceptions

    Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
    • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height, as factory alignment correction will be enhanced with these
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Curved washers face outwards away from bushings during installation, per the product video
    • Product Video
    • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
    • Also sold without ball joints
    • Replacement Ball Joints can be ordered here
    (8 reviews)
    Original price was: $795.00.Current price is: $675.75. Add to cart
  • Sale! Dobinsons variable rate rear coil springs pair
    • Dobinsons variable rate rear coil springs pair
    • Dobinsons C59-701V installed
    Dobinsons

    Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 470mm free height, 16mm wire diameter, 157-230LBF/IN  variable spring rate
    (15 reviews)
    Original price was: $305.00.Current price is: $259.25. Select options