Timbren ABSTORLC1 80 Series Rear bump stops
Timbren ABSTORLC1 80 Series Rear bump stops
FREE SHIPPING
within 48 US States

Timbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops

(11 customer reviews)
  • Suits Land Cruiser 80 Series and Lexus LX450
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
  • Overall kit height = 8.25”
  • Total deflected (compressed) height = 6”
  • Amount of deflection (compression) = 2.25”
  • NOTE: Bolts into the frame.  Adding nutserts may be required depending on frame condition
  • Oversized coils and wide tires without much offset could possibly contact the bump stops
  • Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
  • Click here for instructions

$269.36

In Stock
Share (0)
Total: 0 Total: 0
EAN: 809933008516 SKU: ABSTORLC1 Categories: , , , , , Brand:

Description

The Timbren ABSTORLC1 Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement.

Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

The Timbren ABSTORLC1 replaces the rear bump stops on the Landcruiser 80 Series from 1990 to 1997. Install a bump stop kit and experience the difference.

This kit is rated for 2000 lbs and has a bump-load capacity of 4800 lbs.

Timbren ABSTORLC1 DESCRIPTION

Active Off-Road Bumpstops were designed to replace the original OEM bump stops in order to improve your off-road experience in 3 ways:

Provide Smooth Axle Engagement

Instead of the harsh jounce you get from regular bump stops, enjoy a much softer, smoother landing when your vehicle bottoms out.

Maintain Axle Travel

Active Off-Road Bumpstops will not limit axle travel, but allow full articulation of the suspension system

Deliver Greater Control Over The Vehicle

Remain in control of your off-road vehicle even during hard-to-handle situations on extreme terrain and at high speeds

WARRANTY

Timbren Active Off-Road Bumpstops come with a Lifetime Warranty which includes:

  • Defects in material and workmanship.
  • Damaged parts under normal use and service.

Warranty limitations include the following:

  • Warranty applies to original purchaser.
  • Warranty is not transferable to another vehicle.
  • Warranty does not include labor, freight or collateral damage.
  • Timbren reserves the right to inspect the failed part and ask for proof of purchase.
  • Timbren will not warrant the product in the event of alteration, misuse, overload, negligence or damage cause by others.

FAQ’S

What’s the difference between Active Off-Road Bumpstops and Timbren SES?

Active Off-road Bumpstops are used to soften the harsh impact when driving off-road. They also help avoid damage to the shock absorber and contact of larger tires with the fender. Timbren SES serve as helper springs to level the load and reduce roll and sway for vehicles carrying heavy loads.

My off-road vehicle has a suspension lift. Will Timbren’s Active Off-Road Bumpstops still work for me?

Absolutely! Timbren’s Active Off-Road Bumpstops are designed to work with your vehicle regardless of the lift kit you have installed. If you want them to engage sooner, simply order a spacer kit.

Should I install Active Off-Road Bumpstops on both the front and rear suspension of my vehicle?

We recommend both front and rear, especially when navigating rough, off-road terrain. Active Off-Road Bumpstops on all 4 corners of your vehicle will work together to give you a smooth, safe ride.

Do Active Off-Road Bumpstops require any maintenance?

No. Just like Timbren SES kits, Active Off-Road Bumpstops are also maintenance free.

What are Active Off-Road Bumpstops made from?

The Active Off-Road Bumpstops are made from natural rubber with all the unique characteristics inherent in rubber springs.

What is the warranty for Active Off-road Bumpstops?

All Active Off-Road Bumpstops come with a Lifetime warranty covering all replacement parts up until the time you sell your vehicle.

Compatible Vehicles

  • 1997 TOYOTA LAND CRUISER 80 SERIES 4WD
    1996 TOYOTA LAND CRUISER 80 SERIES 4WD
    1995 TOYOTA LAND CRUISER 80 SERIES 4WD
    1994 TOYOTA LAND CRUISER 80 SERIES 4WD
    1993 TOYOTA LAND CRUISER 80 SERIES 4WD
    1992 TOYOTA LAND CRUISER 80 SERIES 4WD
    1991 TOYOTA LAND CRUISER 80 SERIES 4WD
    1990 TOYOTA LAND CRUISER 80 SERIES 4WD
  • 1995 Lexus LX450
    1996 Lexus LX450
    1997 Lexus LX450

 

11 reviews for Timbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops

  1. David (verified owner) –

    Good quality, really nice.

  2. Jason (verified owner) –

    It’s exactly what I wanted.

  3. Justin (verified owner) –

    Value for money, super satisfied.

  4. Brian (verified owner) –

    Great description on the page, easy to understand what I was buying.

  5. Aaron (verified owner) –

    Very good customer service, super friendly.

  6. Adam (verified owner) –

    Good quality, really nice.

  7. Andrew (verified owner) –

    Just what I needed.

  8. Brandon (verified owner) –

    Value for money, super satisfied.

  9. Thomas (verified owner) –

    Just what I needed.

  10. Michael (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  11. Matthew (verified owner) –

    This is my go-to now for off road parts.

Add a review

Related products

  • Sale! Dobinsons rear coil springs in teal color
    • Dobinsons rear coil springs in teal color
    • Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks
    • Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks
    80 Series Land Cruiser (1990-1997)

    Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Choose what coil suits your vehicle and needs the best
    • Any part number with a V in it means it’s a variable rate/progressive rate spring
    • C59-221V – Stock height, variable rate
    • c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
    • C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
    • c59-169 – 1.75″ with up to 220lbs weight
    • c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
    • C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
    • c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
    • c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
    • C59-153 – 3″ lift with 880LBS constant rear load
    • C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
    • C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
    • C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
    • c59-309 – 4″ lift with 110-220lbs weight
    • c59-313 – 4″ lift with 400-750lbs weight
    • c59-317 – 6″ lift with stock weight
    • c59-319 – 6″ lift with 200LBS constant weight
    • C59-311 – 6″ lift with 880LBS constant weight
    • Sold in Pairs
    • Click HERE to see the FRONT coil options
    • Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
    (6 reviews)
    From $270.00 Select options
  • Sale! Black Dobinsons Coils color
    • Black Dobinsons Coils color
    • Dobinsons front coil springs in teal color
    • Red Dobinsons Coils color
    Dobinsons

    Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
    (15 reviews)
    Original price was: $270.00.Current price is: $229.50. Select options
  • Sale! 80 Series Front Rear Panhard Rod 4Runner GX470 GX460 100 Series 200 Series
    Dobinsons

    Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
    • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
    • Replaces OE Rear Panhard Rod, adjustable to suit lift height
    • Re-centers the rear axle after lifting
    • Zinc plated steel and E-coated with high quality rubber bushes installed
    • Off-car adjustable, cannot be set while fully installed
    • For 45mm (1.75″) of lift or more
    • Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
    (11 reviews)
    Original price was: $345.00.Current price is: $293.25. Add to cart
  • Sale!
    Dobinsons Diff Drop Kit for Toyotas DD59-527K
    On Backorder
    • Dobinsons Diff Drop Kit for Toyotas DD59-527K
    • Dobinsons DD59-527K diff drop kit installed on Toyota 4runner Tacoma FJ Cruiser GX470 GX460
    Dobinsons
    ETA is early JAN 2025

    Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
    • Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
    • Keeps CV angles at a good working angle
    • Suitable for lifts over 2.0″.  There’s really no benefit to adding them if there’s less lift than 2.0″
    • Includes all necessary hardware, including machined spacers and nuts/bolts
    • Includes 2 different lengths of the long bolts as some vehicles need them longer than others
    • Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
    • Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
    • Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
    • Installation Instructions
    (17 reviews)
    Original price was: $60.00.Current price is: $51.00. Add to cart