Your cart is currently empty!
Toyota Land Cruiser 60 Series Gull Wing Window
- Suits 1980-1990 Toyota Land Cruiser 60 Series and 62 Series SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Made in Australia by The Cruiser Company
$495.00
In StockDescription
Land Cruiser 60 Series Gull Wing Window
What is a 60 Series gull wing window? Picture a seagull flying over the coast line with its glorious wings outwards, flying up and down. Now ignore that and pretend you own a Land Cruiser and you’re sick of trying to get access into the rear cargo area of your cruiser when all you have are those small windows at best, and your significant other has packed way too much junk into the cargo area for you to be as organized as you like, so now you are looking or a solution to gain easier access!! Replace the glass side window on the rear left or right, or both, with these lift up replacement windows to get 100% access through the body opening of your SUV. The Cruiser Company has been building sick products for years in Australia, and now they’re available here in the USA via Exit Offroad and Long Range America. Made from 3mm aluminum on the outer panel and 2mm stainless steel inner mounts and structures, these are powder coated with a texture black for longevity and good looks, and they come with a thick rubber seal to keep everything sealed up properly, lockable compression latches that ensure that seal is properly pressurized, stainless steel hinges that will outlast the vehicle, and a gas strut to assist with opening, so that even your dog could open it up!! Well, probably not, but maybe your significant other could at least, and not complain. Wouldn’t that be the best thing ever, especially on an overland voyage or national park tour!!
What does it take to install one of these? Well, it’s not recommended for an amateur, but someone that has messed with brakes, suspension and other involved mechanical aspects of a vehicle could probably get this done, but it is recommended to be done by a trained professional with experience in fitting 4×4 accessories and working with glass and seals (just to be official). Instructions are provided as well as a list of everything needed to get the installation done.
Cruisers are also known to develop window leaks over time, especially when old seals start to go, so instead of replacing it with glass, which could be super hard to find, as well as OEM seals, here’s a great aftermarket option to take care of it all at once and get better functionality at the same time!!
- Suits 1980-1990 Toyota Land Cruiser 60 Series and 62 Series SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Made in Australia by The Cruiser Company
Proudly 100% Australian Made Products
Established in 2020 and based in South East Melbourne, The Cruiser Company manufactures four wheel drive bar work as well as a range of other 4×4 accessories to meet the modern day adventurer and overlander’s needs when getting out of the busy day to day world.Â
With a passionate team of individuals, The Cruiser Company places emphasis on making high quality four wheel drive products that will stand the test of time.
​All barwork and accessories are laser cut, folded and powder coated locally and welded in-house.
​We have in house design capabilities including 3D scanning, CAD design and rapid prototyping.
Modern bar work and accessories designed to last
Our products are meticulously constructed from 5mm steel, ensuring unparalleled strength and durability.
Each bar and accessory is meticulously designed to not only withstand but conquer the toughest conditions, offering ultimate protection without compromising on aesthetic appeal.
Whether you’re navigating remote outback trails or urban landscapes, Cruiser Company’s bars and accessories are the pinnacle of reliability and style, ensuring your vehicle is ready for any adventure
Vehicle Suitability:
1980 Toyota Land Cruiser 60 Series
1981 Toyota Land Cruiser 60 Series
1982 Toyota Land Cruiser 60 Series
1983 Toyota Land Cruiser 60 Series
1984 Toyota Land Cruiser 60 Series
1985 Toyota Land Cruiser 60 Series
1986 Toyota Land Cruiser 60 Series
1987 Toyota Land Cruiser 60 Series
1988 Toyota Land Cruiser 62 Series
1989 Toyota Land Cruiser 62 Series
1990 Toyota Land Cruiser 62 Series
Related products
-
80 Series Land Cruiser (1990-1997)Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews) -
60 62 Series Land Cruiser (1980-1989)
Toyota Land Cruiser 62 Series 1988-90 Long Range Replacement Fuel Tank (EFI USA Spec)
- Suits Toyota Landcruiser 62 Series Wagons 1988-1990 with EFI engine
- Replacement tank – 40 gallon capacity replaces original 23.8 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLC602RE
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD142 Air Locker Toyota 12 Bolt Full Float
- For Use With Toyota 12 Bolt Full Float 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75Â Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-7L-F Front Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- 45mm front lift with 110-220LBS of additional weight and gas engine
- Remove the 3rd leaf from the top to make these the HJ61-6L-F
(5 reviews)
