Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Toyota Tacoma Overhead MOLLE Panel | 2005-2015
- Suits 2005-2015 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 2″ (between rear grab handles)
- Bolt-on installation, bolts where the factory grab handles go
- Approximate Molle mounting area is 9.5″ x 40.5″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
$228.00
In StockDescription
Get the most out of your Tacoma’s ceiling space with All-Pro Off-Road’s Tacoma Overhead MOLLE Panel
2005-2015 Tacoma Overhead MOLLE Panel
All-Pro Off-Road’s 2005-2015 Tacoma Overhead Molle Panel is designed to maximize the storage space of your Tacoma. It offers customizable mounting for all of your gear. The Overhead Molle Panel provides mounting options for rifles, bear spray, flashlights, tire pressure gauges, and just about anything else you can think of that fits in a pouch. The available mounting area on the panel is 9.5″ x 40.5″. The panel mounts to the roof above the rear seat and does not cover the rear dome light. You can mount gear to the bottom of the rack and also place small items between the rack and roof. The panel is a completely “bolt-on” product with no drilling required for installation. The panel is CNC cut and formed from 14-gauge steel and comes standard with a long-lasting black powder coat finish. You have the option to reuse the original grab handles or purchase aftermarket handles.
NOTE: Customers are encouraged to mount heavier items closer to the sides where the rack mounts to the roof. It is up to the customer’s good judgment to not overload the rack.
- Suits 2005-2015 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 2″ (between rear grab handles)
- Bolt-on installation
- Approx. Molle mounting area is 9.5″ x 40.5″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
Vehicle Suitability
2005 Toyota Tacoma Molle Panel
2006 Toyota Tacoma Molle Panel
2007 Toyota Tacoma Molle Panel
2008 Toyota Tacoma Molle Panel
2009 Toyota Tacoma Molle Panel
2010 Toyota Tacoma Molle Panel
2011 Toyota Tacoma Molle Panel
2012 Toyota Tacoma Molle Panel
2013 Toyota Tacoma Molle Panel
2014 Toyota Tacoma Molle Panel
2015 Toyota Tacoma Molle Panel
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
Additional information
| Weight | 10 lbs |
|---|
12 reviews for Toyota Tacoma Overhead MOLLE Panel | 2005-2015
You must be logged in to post a review.
You may also like…
-
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed Stiffener Kit | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Some drilling is required for installation
- Installation Instructions
- Made in the USA!!
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed MOLLE Panel | 2005-2023
- Suits 2005-2023 Toyota Tacoma, short or long bed
- Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
- The panel can also be used to provide additional tie down locations for securing gear in the bed
- You will never run out of uses for this modular mounting panel
- Includes 11 Gauge Steel Molle Panel and Mounting Brackets
- Zinc Plated Mounting Hardware
- Panel has a Black Powder Coat Finish
- Compatible With or Without Factory Front Bed Accessory Bar
- .44” and .20”. Nominal Diameter Round Mounting Holes
- No Drilling is Required for Installation
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
- Made in the USA!!
(10 reviews)
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
- Suits 2005 to 2023 Toyota Tacoma 4×4 and Tundra 2000 to 2006
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boots to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
- Pin mount top, eyelet lower
- Available in Yellow or Black
- Sold in pairs
(8 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
Suspension
Dobinsons Tacoma Lift Kit for 2005-2023 4×4 (all options)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose from classic Twin Tube Shocks, IMS Monotube, or MRA 3-Way Adjustable Remote Resi Shocks
- Read this to learn about the shock differences – Shock Types
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
- Common installation instructions related to parts on this page
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-220 Pair of Extended Travel Front Struts | Toyota + Lexus
- Suits 2005 to 2023 Toyota Tacoma 4×4, Toyota FJ Cruiser from 2006 to 2009, Toyota 4Runner 2003 to 2009 4th Gen, and Lexus GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Adds 1″ of lift due to the raised coil seat height
- Dobinsons GS59-220 Specification: 558mm extended, 435mm compressed, 50mm body, 226mm coil seat height
- Available in Yellow or Black
(9 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews)
Mark (verified owner) –
This is my go-to now for off road parts.
Chad (verified owner) –
It’s exactly what I wanted.
Aaron (verified owner) –
Good quality, really nice.
Timothy (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Charles (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
David (verified owner) –
It’s exactly what I wanted.
Shawn (verified owner) –
This is my go-to now for off road parts.
Nathan (verified owner) –
Very good customer service, super friendly.
Eric (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Richard (verified owner) –
Very good customer service, super friendly.
Nathan (verified owner) –
Great description on the page, easy to understand what I was buying.
Daniel (verified owner) –
Value for money, super satisfied.