Your cart is currently empty!
Sale!
FREE SHIPPING
within 48 US States
within 48 US States
Toyota Tundra Bed Stiffener Kit | 2007-2021
- Suits 2007 to 2021 Toyota Tundra, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Some drilling is required for installation
- Installation Instructions
- Made in the USA!!
Original price was: $202.00.$172.00Current price is: $172.00.
In Stock
SKU: AP-307746
Categories: All Pro Offroad, Performance Upgrades - Tundra 2nd Gen, Roof Racks, Skid Plates, Sliders, Bumpers, Racks - Tundra 2nd Gen, Tundra 2nd Gen (2007-2021)
Brand: All-Pro Off-Road
Description
Get the most out of your Tundra’s composite bed with All-Pro Off-Road’s Bed Channel Toyota Tundra Bed Stiffener Kit.
Toyota Tundra beds are capable of carrying a great payload but the bed sides need reinforcement. With the added weight and stress from a bed rack, rooftop tent, and even tie down straps your bed channels may flex and eventually crack. Modifying the truck bed to allow room for larger tires will cost you some bed rigidity. Protect your investment and strengthen your bed with this easy to install Toyota Tundra Bed Stiffener Kit.
The Tundra bed stiffener system adds 8 tie-down locations to each side. You no longer need to worry about damaging your truck by over-tightening the straps near the tailgate. Looking for a great place to mount your CB antenna whip? Our bed stiffener brackets are topped with an accessory mount that makes a great location for your antenna, lights, or off-road flag.
Strongest on the market.
All-Pro Tundra bed stiffener brackets are designed with double shear mounting points and are constructed from 3/16″ thick ASTM A36 steel. Brackets are finished with a durable textured black powder-coat.
Note! T40 Torx bit (not included) is required for installation.
Some drilling is required for installation.
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those, like these
- Made in the USA!!
This video shows the process on a Tacoma, which is extremely similar to the process for the Tundra installation.
Vehicle Suitability
2007 Toyota Tundra Bed Stiffener Kit
2008 Toyota Tundra Bed Stiffener Kit
2009 Toyota Tundra Bed Stiffener Kit
2010 Toyota Tundra Bed Stiffener Kit
2011 Toyota Tundra Bed Stiffener Kit
2012 Toyota Tundra Bed Stiffener Kit
2013 Toyota Tundra Bed Stiffener Kit
2014 Toyota Tundra Bed Stiffener Kit
2015 Toyota Tundra Bed Stiffener Kit
2016 Toyota Tundra Bed Stiffener Kit
2017 Toyota Tundra Bed Stiffener Kit
2018 Toyota Tundra Bed Stiffener Kit
2019 Toyota Tundra
2020 Toyota Tundra
2021 Toyota Tundra
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
Additional information
| Weight | 14.5 lbs |
|---|
7 reviews for Toyota Tundra Bed Stiffener Kit | 2007-2021
You must be logged in to post a review.
You may also like…
-
Roof Racks
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews)
Related products
-
Tundra 2nd Gen (2007-2021)
Dobinsons Rear Leaf Springs Options for Toyota Tundra 2007-21
- Suits Toyota Tundra 2007-2021
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
(9 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
Dobinsons
Dobinsons Tundra 2.25-3.0″ Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Multiple coil colors available
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- NEW IMS struts and shocks now available – Adjustable height front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- Front IMS assembly instructions
(10 reviews) -
Dobinsons
Dobinsons 2″ Rear Lift Quick Ride Kit Toyota Tundra 2000 to 2021
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – GS59-711
- Only to be used with OE height leaf springs
- Installation Instructions
(6 reviews)
Mark (verified owner) –
Good quality, really nice.
Jose (verified owner) –
This is my go-to now for off road parts.
Adam (verified owner) –
Would definitely buy from this site again.
Adam (verified owner) –
It’s exactly what I wanted.
Nicholas (verified owner) –
Very good customer service, super friendly.
Benjamin (verified owner) –
Value for money, super satisfied.
Travis (verified owner) –
Just what I needed.