Your cart is currently empty!
Sale!
15% off Year End Sale
Wheeler’s 1″ Lift Add-A-Leaf Set for 2007-21 Tundra
- Suits 2007-2021 Toyota Tundra
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.0″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
Original price was: $108.00.$92.00Current price is: $92.00.
In Stock
SKU: WHE-AAL41-KIT
Categories: Add-a-Leaf, Excluded, Leaf Springs, Leaf Springs - Tundra 2nd Gen, Suspension, Tundra 2nd Gen (2007-2021), Wheelers Off Road
Brand: Wheeler's Off Road
Description
WHEELER’S OFF-ROAD 1.0″ LIFT ADD-A-LEAF SET FOR 2007-2021 TOYOTA TUNDRA
This Wheeler’s Off-Road single leaf Add-A-Leaf Set (2 leafs) is made specifically for the 2007-2021 Toyota Tundra. They work with your factory length u-bolts or aftermarket.
Wheeler’s Off-Road custom manufactures add a leaf kits for 2007-2021 Tundra trucks. Our add a leaf kits feature diamond cut ends and anti-friction pads for smooth, squeak free performance. They are tuned to enhance load performance while providing a good ride. Center Pins are included.
***NOTE: Lift amounts are approximate. Heavier weight Tundra trucks may experience less lift than listed.
5 reviews for Wheeler’s 1″ Lift Add-A-Leaf Set for 2007-21 Tundra
You must be logged in to post a review.
Related products
-
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews)
David (verified owner) –
Value for money, super satisfied.
Brian (verified owner) –
It’s exactly what I wanted.
Robert (verified owner) –
Value for money, super satisfied.
Scott (verified owner) –
Good quality, really nice.
Shawn (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.