Your cart is currently empty!
Sale!
15% off Year End Sale
Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
- Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
- Adds 1.5″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
- On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
- Instructions
Original price was: $208.00.$177.00Current price is: $177.00.
In Stock
SKU: WOR-311296
Categories: Add-a-Leaf, Excluded, Leaf Springs, Leaf Springs - Tacoma 1st Gen, Leaf Springs - Tacoma 2nd Gen, Leaf Springs - Tacoma 3rd Gen, Leaf Springs - Tundra 1st Gen, Suspension, Tacoma 1st Gen (1996-2004), Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023), Tundra 1st Gen (2000-2006), Wheelers Off Road
Brand: Wheeler's Off Road
Description
WHEELER’S OFF-ROAD 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift for 1995-2023 Tacoma and 1999-2006 Tundra
Wheeler’s Off-road 3-leaf progressive racing style add-a-leaf set. Designed to replace your factory overload leaf. Kit includes longer U-bolts and center pins.
These add a leaf kits feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak-free performance. They are tuned to enhance load performance while providing a good ride. Includes two add-a-leaf packs (3 leafs each), center pins and u-bolts.
NOTE:Â Lift amounts are approximate and may vary depending on chassis and load.
On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap.
What is an AAL (Add-A-Leaf)?
An add-a-leaf (AAL) is an extra leaf added to a vehicle’s leaf spring pack to increase its carrying capacity, reduce sway, or increase ride height. AAL kits are a more economical and easier-to-install alternative to replacing the existing leaf springs. Depending on the vehicle, adding a leaf can raise the rear of a vehicle by 0.5–3 inches.
Vehicle Fitment:
1995 Toyota Tacoma AAL Set
1996 Toyota Tacoma AAL Set
1997 Toyota Tacoma AAL Set
1998 Toyota Tacoma AAL Set
1999 Toyota Tacoma AAL Set
2000 Toyota Tacoma AAL Set
2001 Toyota Tacoma AAL Set
2002 Toyota Tacoma AAL Set
2003 Toyota Tacoma AAL Set
2004 Toyota Tacoma AAL Set
2005 Toyota Tacoma AAL Set
2006 Toyota Tacoma AAL Set
2007 Toyota Tacoma AAL Set
2008 Toyota Tacoma AAL Set
2009 Toyota Tacoma AAL Set
2010 Toyota Tacoma AAL Set
2011 Toyota Tacoma AAL Set
2012 Toyota Tacoma AAL Set
2013 Toyota Tacoma AAL Set
2014 Toyota Tacoma AAL Set
2015 Toyota Tacoma AAL Set
2016 Toyota Tacoma AAL Set
2017 Toyota Tacoma AAL Set
2018 Toyota Tacoma AAL Set
2019 Toyota Tacoma AAL Set
2020 Toyota Tacoma AAL Set
2021 Toyota Tacoma AAL Set
2022 Toyota Tacoma AAL Set
2023 Toyota Tacoma AAL Set
1999 Toyota Tundra AAL Set
2000 Toyota Tundra AAL Set
2001 Toyota Tundra AAL Set
2002 Toyota Tundra AAL Set
2003 Toyota Tundra AAL Set
2004 Toyota Tundra AAL Set
2005 Toyota Tundra AAL Set
2006 Toyota Tundra AAL Set
6 reviews for Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews)
Joseph (verified owner) –
Good quality, really nice.
David (verified owner) –
It’s exactly what I wanted.
Benjamin (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bradley (verified owner) –
This is my go-to now for off road parts.
Kenneth (verified owner) –
Very fast delivery.
Andrew (verified owner) –
Very good customer service, super friendly.