Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
- Suits the following vehicles: 2005-2023 Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022-2025+ Tundra, 2008-2025+ Sequoia
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), hardware, and an Allen wrench for installation
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
- Installation Instructions
$180.00
In StockDescription
Wheeler’s Front Superbumps for 03-24 4Runner, FJ Cruiser, 05-23 Tacoma, and 07-21 Tundra, as well as Lexus GX470 and GX460, also fits 2022+ Tundra
These custom molded Wheeler’s Front Superbumps bump stops are made from our super durable micro-cellular polyurethane formula and provide a much more controlled, progressive and comfortable bottoming response from your front suspension compared to rubber or solid polyurethane.
A hard bottom out can be felt throughout the vehicle and by using these softer progressive bump stops, the bottom out will be cushioned much better than stock, which eases pressure on front end suspension components as well as the frame. Bottoming out a suspension too often can lead to strut damage by allowing the pressure inside to build up too much. A critical component of proper suspension design is a proper bump stop, so be sure to consider upgrading and setting these properly on your vehicle. This will not only help prolong the life of your suspension components, but the ride quality will feel a lot better from inside the cab of the vehicle.
Please note: The front lower control arms on these vehicles may have two bump stop locations (forward and rear). Our Superbump Bump stops mount in the rear location of the control arms. The OEM bump stop should remain in the front location to assist with harder hits or bottom-outs.
These come with hardware and an Allen wrench. Sold in pairs.
Optionally, we have 1/4″ and 3/8″ spacers available to purchase separately for bump stop height tuning.
Note:Â We recommend these bump stops for lifted vehicles only. On stock height vehicles, they may hit sooner and limit up travel.
To see other bump stops offered by Exit Offroad, be sure to click this link here: https://exitoffroad.com/product-category/suspension/bump-stops/
Compatible Vehicles
- 2023 TOYOTA TACOMA ALL MODELS
- 2024 TOYOTA 4RUNNER ALL MODELS
- 2023 TOYOTA 4RUNNER ALL MODELS
- 2023 LEXUS GX460 ALL MODELS
- 2022 TOYOTA 4RUNNER 4WD
- 2022 LEXUS GX460 ALL MODELS
- 2025 TOYOTA TUNDRA ALL MODELS
- 2024 TOYOTA TUNDRA ALL MODELS
- 2023 TOYOTA TUNDRA ALL MODELS
- 2008-2025 TOYOTA SEQUOIA
8 reviews for Wheeler’s Front Superbump Set for Toyota & Lexus Trucks & SUV’s
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
(14 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Pickup Trucks
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews)
Paul (verified owner) –
It’s exactly what I wanted.
Anthony (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
William (verified owner) –
Value for money, super satisfied.
Scott (verified owner) –
Good quality, really nice.
James (verified owner) –
It’s exactly what I wanted.
Eric (verified owner) –
It’s exactly what I wanted.
Benjamin (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jacob (verified owner) –
This is my go-to now for off road parts.