Suits the following vehicles: 2005-2023 Tacoma, 2003-2024 4Runner, all FJ Cruiser years, Lexus GX470 and GX460, 2007-2021 Tundra, 2022-2025+ Tundra, 2008-2025+ Sequoia
Bolts in easily and quickly to replace the firm factory bump stops
Includes necessary bump stops (2), hardware, and an Allen wrench for installation
Made of a super durable micro-cellular polyurethane formula
Provides controlled, progressive and comfortable bottoming response from your front suspension
Optional spacers and longer hardware are sold separately for fine tuning of bump stop clearances
Wheeler’s Front Superbumps for 03-24 4Runner, FJ Cruiser, 05-23 Tacoma, and 07-21 Tundra, as well as Lexus GX470 and GX460, also fits 2022+ Tundra
These custom molded Wheeler’s Front Superbumps bump stops are made from our super durable micro-cellular polyurethane formula and provide a much more controlled, progressive and comfortable bottoming response from your front suspension compared to rubber or solid polyurethane.
A hard bottom out can be felt throughout the vehicle and by using these softer progressive bump stops, the bottom out will be cushioned much better than stock, which eases pressure on front end suspension components as well as the frame. Bottoming out a suspension too often can lead to strut damage by allowing the pressure inside to build up too much. A critical component of proper suspension design is a proper bump stop, so be sure to consider upgrading and setting these properly on your vehicle. This will not only help prolong the life of your suspension components, but the ride quality will feel a lot better from inside the cab of the vehicle.
Please note: The front lower control arms on these vehicles may have two bump stop locations (forward and rear). Our Superbump Bump stops mount in the rear location of the control arms. The OEM bump stop should remain in the front location to assist with harder hits or bottom-outs.
These come with hardware and an Allen wrench. Sold in pairs.
Optionally, we have 1/4″ and 3/8″ spacers available to purchase separately for bump stop height tuning.
Note:Â We recommend these bump stops for lifted vehicles only. On stock height vehicles, they may hit sooner and limit up travel.
Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
**Kit photo shows with every additional option purchased**
Coils are specifically suited to match OE spec and height
Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
You must choose what coils, shocks and other components you want to add
Paul (verified owner) –
It’s exactly what I wanted.
Anthony (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
William (verified owner) –
Value for money, super satisfied.
Scott (verified owner) –
Good quality, really nice.
James (verified owner) –
It’s exactly what I wanted.
Eric (verified owner) –
It’s exactly what I wanted.
Benjamin (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jacob (verified owner) –
This is my go-to now for off road parts.