Your cart is currently empty!
Dobinsons 100 Series Torsion Bars Pair for DIESEL ONLY 1998-2007
- For DIESEL powered Land Cruisers from 1998 to 2007
- Total length is 1210mm, 34mm bar thickness
- These WILL NOT fit a V8 gas model Land Cruiser, they’re too long
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Comes as a set, 1 per vehicle
$425.00
In StockDescription
Dobinsons 100 Series Torsion Bars part number TB59-1610 are heavy duty torsion bars made specifically for the DIESEL models. These cannot be used on the V8 gasoline models as those use a different length. Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
If you have a turbo diesel 100 Series or a diesel 100 Series Land Cruiser and are looking for torsion bars, these diesel torsion bars are what you’ll need. In the USA, most companies only sell torsion bars for the V8 gas model, and those don’t fit the diesel.
The stock torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons 100 Series Torsion Bars heavy duty 4×4 diesel torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons 100 Series Torsion Bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
These are an alternative option to OME 303002 or ARB 303002 torsion bars
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
2 reviews for Dobinsons 100 Series Torsion Bars Pair for DIESEL ONLY 1998-2007
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Front 30mm Coil Spacer (Single)
- Suits:
- Land Cruiser 80 Series and Lexus LX450
- Range Rover 1971-1988
- Land Rover Discovery Series I 1991-1999
- Defender 90 1984-1990
- Defender 110 1984-1992
- Defender 110 + 130 1992-2001
- Defender 110 + 130 2007-2019
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) - Suits:
-
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
- Rear Long Travel Coils Installation Guide
(15 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews)
Charles (verified owner) –
*****
Kevin (verified owner) –
Would definitely buy from this site again.