Your cart is currently empty!
Front KDSS Spacer – Lexus GX460 5th Gen 4Runner
- Front single spacer with hardware only
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a front spacer
- Bolt on installation
- May require modification of a factory skid plate to clear the sway bar link at full droop
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes 1 x front mount with hardware
- See instructional video for how these get installed here
- Installation Instructions
- A full kit including the single front spacer is also offered HERE
$70.00
In StockDescription
Front KDSS Spacer for the front only – Lexus GX460 5th Gen 4Runner by Treaty Oak Offroad, for a great solution to an annoying problem on lifted Lexus and Toyota SUV’s.
- KDSS Spacer Kit Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- KDSS Spacer Kit Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacer to both mounts on the rear
- KDSS Spacer Kit is a Bolt-on installation
- May require modification of a factory skid plate to clear the sway bar link at full droop
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Installation Instructions
If you’re lifted, and have wheeled, you have undoubtedly encountered some kdss lean. In the 4 years of working with my 2005 GX470 sport with kdss, I have run into this issue multiple times, and developed this kit to run extended travel rear shocks and help combat kdss lean. The same applies to the Lexus GX460 and Toyota 4Runner 5th Gen
WHY DOES THIS HAPPEN?!
▪️KDSS is a complete system front and rear, that works in tandem. The driver side has an articulating cylinder and the passenger side has a rigid link, connected to the LCA (or axle in rear) via a large sway bar. They work together via hydraulic lines and accumulators that open and close to allow fluid to flow, or not flow, depending on speed. On a stock vehicle this allows for extended wheel travel vs a standard sway bar setup AND sports car type handling at speed.
▪️When your vehicle is lifted, the cylinder extends as the vehicle is raised, but the passenger side can’t due to that rigid link. This is what causes your lean.
What we developed, will equalize the pressure in the system via a set of spacers (1 in front, 2 in rear) that are utilized within the KDSS system itself and return the angle of the sway bar back to OEM angles after a lift has been installed. In turn, this will dramatically reduce or eliminate your lean.
These are 6061 aluminum, type III hard coat anodized in black, and supplied with new hardware..
*This may require modification to your factory skid plates
*While we have had fantastic results reducing and eliminating lean, due to the nature of the KDSS system it is still possible to experience some lean. A proper KDSS balance and the use of our spacers are the best option for maximizing wheel travel, while minimizing lean.
Related products
-
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
Suspension
Dobinsons C59-302 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
$270.00 Select options -
Dobinsons
Dobinsons C59-677V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
$305.00 Select options -
GX460 (2010-2023)
Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)
- Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
- You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus
From $1,200.00 Select options