Your cart is currently empty!
Dobinsons 4Runner FJ GX460 Sway Bar Relocation Brackets 2010+
- Suits 2010-2024 Toyota 4Runner 4×4 models, 2010+ Toyota FJ Cruiser, 2010+ Lexus GX460 (without KDSS)
- Moves the stock front sway bar mount forward for better clearance to the coilover
- Includes 2 stamped steel brackets
- Easy bolt-on installation
- Recommended for lift heights of 2″ or more
- **Does not drop or lower the sway bar position
- NOT for vehicles with KDSS
$60.00
In StockDescription
This 4Runner swaybar relocation bracket kit includes 2 front stamped steel brackets to move the sway bar forward on 2010-2024 Toyota 4Runner models, 2010-2016 Toyota FJ Cruiser, and 2010+ Lexus GX460, gaining clearance from the sway bar to the front coilovers. These are a good idea to add when a vehicle is lifted 2″ or more to correct the sway bar angle. At 3″ or more, these should most definitely be added.
Not for use on vehicles with KDSS.
Instructions are simple on this 4Runner Swaybar Relocation Bracket Kit. Undo the stock sway bar mounts where it attaches to the frame and use the new stamped steel brackets to push the sway bar forward, and retighten.
To see all 4Runner parts that Exitoffroad.com has to offer, follow this link here:Â https://exitoffroad.com/product-category/toyota/4runner/
Related products
-
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart -
Suspension
Dobinsons Rear U-Bolts – UB59-667K (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are square at the top
- For Nissan Frontier D41 2022+ models, these UB59-667K suit the L59-002-R leaf springs only. The heavier rated springs need the UB59-453-2K U-bolts.
$90.00 Add to cart -
Suspension
Dobinsons C59-302 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 395mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- THE best selling coils that Dobinsons sell for any vehicle in the USA
$270.00 Select options -
ExceptionsShips FREE !!
within 48 US StatesETA is July 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart