Factor 55

Showing all 8 results

Factor 55
Factor 55 Hitchlink 2.0 for 2″ Receivers
- Hitchlink 2.0, for 2″ receivers
- Slide it into the receiver, secure it with a pin, and you’re ready to pull
- Made from lightweight, super-strong CNCmachined 6000 series aluminum
- Simply slide the shackle mount into receiver opening and secure with hitch pin (not included)
- Machined radius on shackle mount hole for soft shackle compatibility
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits common ¾ screw pin shackles/D-Rings
- Machined radius on shackle mount hole for soft shackle compatibility
- Anodized or powder coated for oxidation protection
- Overall size- 6.6″ x 2″ x 2″
- Engineered, tested, and made in USA
$83.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 ProLink Bridle
- Three individual shackle mounting holes allow the winch operator to mount fixed-length bridle links to the outside positioned holes for common bridle towing and single centered shackle mounting point for a conventional single shackle recovery point
- Commercial product designed primarily for the towing industry
- Fits all steel cables and synthetic ropes up to 3/8inch diameter
- Prevents dangerous shackle side loading conditions
- 5/8 diameter Titanium double-shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips and protects fairleads, cushions line stowage, and prevents rattling
- Precision machined from 6000 series aluminum
- Engineered, Tested, and Made in USA. Patent pending
- Working Load Limit: 16,000 lbs., Ultimate failure of greater than 42,000 pounds
- Weight: 38.4 oz
$229.00 Add to cart
Factor 55
Ships FREE !!
within 48 US States
Factor 55 FlatLink Multimount
- Multiple shackle interface for bridle and off-camber towing
- Lightweight – Precision CNC machined 6000 series aluminum
- No splicing required – titanium double shear pin design
- Designed for both steel cables and synthetic winch ropes
- Integrated EPDM rubber pads for fairlead protection
- Foldable – 1.75” thick (Compatible with all fairlead license plate mounting brackets)
- Oval opening connects to either the pin or bow end of common ¾” screw pin shackles and pin ends of 7/8” and 1” screw pin shackles
- 5/8” diameter 6AI-4V titanium double shear pin
- For rope and cable diameters up to 3/8’’
- Fits over most OEM tow hooks
- 2” thick when folded flat
- Max load: 16,000 lbs., Ultimate Strength: 40,000 pounds
- Weight: 32 oz
- MADE IN USA
$229.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 UltraHook Shackle Mount
- Easy-to-install shackle mount with a hole machined into the hook’s body. Shackle pin mounting hole accepts screw pins from common ¾” and soft shackles up to 1/2”
- Use either as a conventional hook or a shackle mount
- No rope splicing required – double shear pin design accepts rope/cable eyes, for use with either steel or synthetic winch rope
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- Max opening deformation clearly laser engraved
- Safety latch with integrated latch lock pin allows for true closed system winching
- Includes 5/8” diameter aerospacegrade 6AI-4V grade V titanium doubleshear pin
- EPDM rubber pads for fairlead protection, and a finger grip feature that promotes proper “Hook Up” orientation; also prevents rattling
- Can be used with line diameters up to 3/8”
- 3” thick when folded flat
- Maximum Load: 16,000 lbs.
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32 oz
- Engineered, Tested, and Made in USA. Patent pending
$280.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 FlatLink E (Expert) Shackle Mount
- Large pear-shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points.
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Precision machined from 6000 series billet aluminum, Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
- Works with common 3/4” shackles (pin and bow end), soft shackles up to 3/4”
- Less than 1.75” of thick, when folded flat
- Maximum Load: 16,000 lbs., Ultimate failure : greater than 40,000lbs
- Compatible with all roller fairlead license plate mounting brackets
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage, and eliminates hook rattle and fairlead damage
- Simple snap ring removal for shear pin
- Weight: 26 oz.
$167.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 FlatLink Shackle Mount
- Double-shear pin and internal snap ring for an ultrasecure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter and works with common 3/4” shackles (pin and bow end) or soft shackles up to 3/4”
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Less than 1.75” of thick, when folded flat
- Max load rating: 16,000lbs, Ultimate failure : greater than 40,000lbs
- Weight: 23 oz.
- Engineered, Tested, and Made in USA. Patent pending
$146.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 ProLink E (Expert) Shackle Mount
- Unique shape offers increased versatility allowing for increased rigging options
- 5/8” diameter 6AI-4V titanium double-shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Connects to either the pin or bow end of common ¾” screw pin shackles, compatible with steel or synthetic rope up to 3/8”
- Connects to the pin ends of 7/8” and 1” screw pin shackles
- Fits over most OEM tow hooks
- Maximum load: 16,000 lbs, Ultimate Strength: 40,000 lbs
- Weight: 32 oz
- Engineered, Tested, and Made in USA. Patent pending
$209.00 Select options
Factor 55
Ships FREE !!
within 48 US States
Factor 55 ProLink Shackle Mount
- 5/8 inch diameter 6Al-4V titanium double shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips and protects fairleads and prevents rattling, also protects alloy fairleads and cushions line stowage
- Precision machined from 6061-T6 Kaiser Aluminum round bar
- 1.2 inch shackle tab thickness reduces “shackle rattle”
- Works with steel or synthetic rope up to 3/8” diameter and eyes equipped with standard or tube thimbles up to 3/8” diameters.
- The rope eye is retained in the ProLink with a 5/8”-diameter grade 6AI-4V grade V
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Max load rating: 16,000 lbs.
- Weight: 24 oz
- Engineered, Tested, and Made in USA. Patent pending
$157.00 Select options