Dobinsons Torsion Bars

Dobinsons TB45-1456 Torsion Bar Pair for Nissan Frontier D21 1986-1997 1202mm

(8 customer reviews)
  • Suits Nissan Frontier and Navara D21 models from 1986 to 1997
  • TB45-1456 measure 1202mm in total length – check before ordering if you aren’t sure
  • Increased spring rate to improve handling and lift front end
  • Powder coated black for a long lasting finish
  • Replaces OE torsion bars without modification
  • Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
  • Photo for illustration purposes

$305.00

In Stock
Share (0)
Total: 0 Total: 0
EAN: 9332670050698 SKU: TB45-1456 Categories: , , , Brand:

Description

Dobinsons TB45-1456 Torsion bar set is suitable for the Nissan Frontier and Navara D21 models from 1986 to 1997, measuring 1202mm long.  Make sure to measure your stock torsion bars before ordering this new set, as there’s a chance it could be the 892mm set from later models.

Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.

Dobinsons TB45-1456 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Dobinsons TB45-1456 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

A thick durable powdercoat provides protection against corrosion.

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL

When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

INCREASED SPRING RATE 

Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Simple Fitment

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

Directionally Preset & Scragged

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Durable Powdercoat Finish

A thick durable powdercoat provides protection against corrosion.

Cold Rolled Splines

Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

Vehicle Suitability:

1986 Nissan Frontier D21
1987 Nissan Frontier D21
1988 Nissan Frontier D21
1989 Nissan Frontier D21
1990 Nissan Frontier D21
1991 Nissan Frontier D21
1992 Nissan Frontier D21
1993 Nissan Frontier D21
1994 Nissan Frontier D21
1995 Nissan Frontier D21
1996 Nissan Frontier D21
1997 Nissan Frontier D21

1986 Nissan Navara D21
1987 Nissan Navara D21
1988 Nissan Navara D21
1989 Nissan Navara D21
1990 Nissan Navara D21
1991 Nissan Navara D21
1992 Nissan Navara D21
1993 Nissan Navara D21
1994 Nissan Navara D21
1995 Nissan Navara D21
1996 Nissan Navara D21
1997 Nissan Navara D21

Additional information

Weight 22 lbs

8 reviews for Dobinsons TB45-1456 Torsion Bar Pair for Nissan Frontier D21 1986-1997 1202mm

  1. John (verified owner) –

    Great description on the page, easy to understand what I was buying.

  2. Jason (verified owner) –

    Value for money, super satisfied.

  3. Jason (verified owner) –

    Would definitely buy from this site again.

  4. Scott (verified owner) –

    Very fast delivery.

  5. Adam (verified owner) –

    I received it really fast.

  6. Jeremy (verified owner) –

    Very good customer service, super friendly.

  7. Jason (verified owner) –

    I received it really fast.

  8. Robert (verified owner) –

    This is my go-to now for off road parts.

Add a review

Related products

  • Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit PB59-1101K
    Dobinsons

    Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
    • Suits Toyota Tacoma 2005-2023
    • For any lift height, or no lift. These are OE replacement bushings.
    • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
    • Pressing of OE bushings may be necessary during removal and installation
    • Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
    • Greasable bolts are sold in pairs, sold separately
    • OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
    • Tacoma poly bushing kit installation
    • Link to Greasable Bolts, Click here
    (14 reviews)
    $105.00 Add to cart
  • Dobinsons rear coil springs in teal color
    • Dobinsons rear coil springs in teal color
    • Black Dobinsons Coils color
    • Red Dobinsons Coils color
    Dobinsons

    Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
    (14 reviews)
    $270.00 Select options This product has multiple variants. The options may be chosen on the product page
  • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    • Dobinsons SE59-529 Extended Rear Swaybar End Link Kit for 4Runner FJ Cruiser GX470 GX460
    Dobinsons

    Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
    • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
    • Order 1 for 1 vehicle
    • Heavy Duty, zinc plated, with high quality ball joint ends for long life
    • Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
    • Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
    • Adjustable to suit lift heights of 2″ to 4″
    • Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
    • Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
    • Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video.  Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
    (15 reviews)
    $200.00 Add to cart
  • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    • Dobinsons steering dampers display image
    • Dobinsons Big Bore Land Cruiser Steering Damper 60 70 80 series SD59-824
    80 Series Land Cruiser (1990-1997)

    Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
    • Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
    • A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
    • If you don’t know how old your current steering damper is, then it’s time to replace it
    • Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
    • Cellular Foam Cell Insert
    • Teflon Piston Rings
    • Excellent Viscosity Temperature Performance
    • NOK Triple Lip Oil Seals
    • High Quality Fuchs German Oil
    • Replaces OE steering damper, bolts into place
    • 650mm extended, 420mm compressed
    (7 reviews)
    $135.00 Add to cart