Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dirt King 2.5 Lexus GX470 DCA Remote Resi Coilovers
- Suits Lexus GX470 2003-2009 (all years)
- Will not suit KDSS models due to the front reservoir mounting position
- Comes preset to 2.0″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.5 DCA coilover shocks with remote reservoirs Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts with reservoir brackets
- Spanner wrench
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
- Matching Rear Shocks
$2,299.00
In Stock
SKU: DK-812989F-GX470
Categories: Dirt King Fabrication, Suspension, Coilovers, GX470 (2002-2009), Full Suspension Kits - GX470, Shocks + Struts - Lexus GX470
Brand: Dirt King Fabrication
Description
The Dirt King 2.5″ Dual Compression Adjuster (DCA) Series GX470 DCA Remote Resi Coilovers will take your Lexus GX470’s off-road capability to the next level while not compromising on-road comfort. Equipped with high-speed and low-speed compression adjusters, these shocks offer the flexibility to fine-tune ride quality across any terrain or driving style. Experience more control with increased wheel travel, more articulation, and higher ground clearance. The coilovers come preset with 2″ of lift to level the vehicle but this can vary if you have other aftermarket upgrades. Included with the shocks is a spanner wrench allowing you to make adjustments. No detail was overlooked on this product to deliver the superior quality and performance that Dirt King is known for.
GX470 DCA Remote Resi Coilovers Suitability:
2003-2009 Lexus GX470
GX470 DCA Remote Resi Coilovers Specifications
- 2.5″ hard-anodized 6061 aluminum bodies
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
*Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality.
What’s Included
- 2.5 DCA coilover shocks with remote reservoirs Pair
- Sway bar relocation mounts with reservoir brackets
- Spanner wrench
- All necessary mounting hardware
- Installation instructions
GX470 DCA Remote Resi Coilovers Features
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
-
*All Dirt King shocks are backed by a comprehensive one year warranty.
Disclaimer
All products sold or manufactured by Dirt King are intended for off-road use only. Our products are strictly engineered and tested and are not to be modified from their original design in any way. Welding should always be done at a qualified and certified facility only. Customer assumes all liability in assuring that parts are installed correctly, maintained, and not modified or altered in any way. Dirt King is not responsible or liable for any accidents, injuries, or deaths that may occur from the use of any products offered. Suspension modifications may change the dynamics and stability characteristics of the vehicle. Ensuring prompt wheel alignment and ADAS recalibration after suspension modifications is critical and the sole responsibility of the customer.
Vehicle Fitment:
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
4 reviews for Dirt King 2.5 Lexus GX470 DCA Remote Resi Coilovers
You must be logged in to post a review.
You may also like…
-
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 DCA Remote Resi Shocks | 4Runner FJ GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
- 2.5 DCA shocks with remote reservoirs Pair
- Shock shaft boots
- Reservoir mounts
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
(4 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP GX470 Coilovers Pair | Lexus GX470 2003-2009
- Suits Lexus GX470 2003-2009
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
- Matching Rear Shocks
(4 reviews) -
Sale!GX470 (2002-2009)FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 1-3.5″ 3-Way Adjustable MRA GX470 Coilovers
- Suits Lexus GX470 – all years 2003-2009
- Looking for a quick and easy way to lift your GX470? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(3 reviews)
Related products
-
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews)
Andrew (verified owner) –
This is my go-to now for off road parts.
Daniel (verified owner) –
Great description on the page, easy to understand what I was buying.
Matthew (verified owner) –
Value for money, super satisfied.
Benjamin (verified owner) –
Very good customer service, super friendly.