Your cart is currently empty!
- Cannot contact the gateway at this time.
RCI Subaru Front Lip Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Designed for use in combination with RCI Front skid plate (required)
- Protects center of OEM front bumper
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware is included
- Direct bolt on no drilling required
$109.99
In StockDescription
Fill the gap between your RCI front skid plate and the OEM bumper for a seamless appearance as well as additional bumper protection. CNC cut and formed from 3/16″ 5052 Aluminum. For use with stock bumper only. *Designed for use in combination with RCI Front skid plate.
DETAILS
Smooth out the transition from the OEM bumper to your RCI front skid plate for a seamless appearance as well as additional protection with a Front Lip by RCI Metalworks.
This plate fills the gap between the stock bumper and an RCI Front skid plate for the 2020-2025 Outback and provides a premium quality, fit and finish.
KEY FEATURES
- Designed for use in combination with RCI Front skid plate
- Protects center of OEM front bumper
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware is included
- Direct bolt on no drilling required
*MUST HAVE THE RCI ENGINE SKIDPLATE TO MOUNT
Vehicle Fitment:
2020 Subaru Outback
2021 Subaru Outback
2022 Subaru Outback
2023 Subaru Outback
2024 Subaru Outback
2025 Subaru Outback
You may also like…
-
Skid Plates
RCI Subaru Outback Transmission Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects transmission and sub-frame
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide full coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Features steel mounting brackets for strength and durability
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
(0 reviews) -
Skid Plates
RCI Subaru Outback Engine Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects front two cross-members , oil pan and turbo if equipped
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protection surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
- Additional Front Lip Piece is Sold Separately!!!
(0 reviews)
Related products
-
80 Series Land Cruiser (1990-1997)
Dobinsons Land Cruiser 80 Series Rear Bumper with Tire and Jerry Can Carrier 1990-1997
- Suits all Toyota Land Cruiser 80 Series and Lexus LX450 from 1990-1997
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5(15 reviews) -
GX460 (2010-2023)
RCI Rock Sliders | Lexus GX460 2010-2023
- Suits Lexus GX460 2010-2023
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate provides up to 15 mounting points on each side of the vehicle, guaranteeing a slider as strong or stronger than anything else on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard with 20 degree upward angle, creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
Rated 5.00 out of 5(5 reviews) -
Skid Plates
RCI Full Skid Plate Set | 2010-2024 4Runner
- Includes front, transmission and transfer-case skid plates.
- Optional add-on catalytic converter guards
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order. Email us for lead times
- Made in the USA
- New option to add Catalytic Converter Guards – INSTRUCTIONS
Rated 5.00 out of 5(8 reviews) -
4Runner 4th Gen (2003-2009)
RCI Full GX470 Skid Plate Set | 2003-2009 4Runner & GX470
- Suits 4th Gen 4Runners and non-KDSS Lexus GX470 V8 Models
- Includes front, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- Made to order based on the selections made below
Rated 5.00 out of 5(9 reviews)