Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons GS43-801 Shocks Pair | Isuzu D-Max Mazda BT-50
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+, Mitsubishi Triton & L200 05/2006-2015 and 2015+ MQ and MR Models
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Photo for illustration purposes
$310.00
In StockDescription
Dobinsons GS43-801 Rear Shocks Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+, Mitsubishi Triton & L200 05/2006-2015 and 2015+ MQ and MR Models.
Dobinsons GS43-801 suitable for stock height up to 2.0″ of lift. These can be used with original leaf springs or aftermarket. Since your vehicle is pretty old now, you could use these shocks with the original leaf springs, but more than likely those stock leafs that are so old now probably have sagged out pretty bad and aren’t holding up the weight of the vehicle properly. By adding a new pair of Dobinsons leaf springs to these new shocks, as well as new pins and shackles, you’ll be setting up the rear end properly and bringing the ride height and ride quality back up to where it is supposed to be.
To see all products that Exit Offroad offers for the D-Max, click on this link here: https://exitoffroad.com/product-category/isuzu/d-max-2012-2020/
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons GS43-801 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
The Dobinsons GS43-801 Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.
Vehicle Fitment:
2012 Isuzu D-Max
2013 Isuzu D-Max
2014 Isuzu D-Max
2015 Isuzu D-Max
2016 Isuzu D-Max
2017 Isuzu D-Max
2018 Isuzu D-Max
2019 Isuzu D-Max
2020 Isuzu D-Max
2021 Isuzu D-Max
2022 Isuzu D-Max
2023 Isuzu D-Max
2024 Isuzu D-Max
2020 Mazda BT-50
2021 Mazda BT-50
2022 Mazda BT-50
2023 Mazda BT-50
2024 Mazda BT-50
2006 Mitsubishi Triton L200
2007 Mitsubishi Triton L200
2008 Mitsubishi Triton L200
2009 Mitsubishi Triton L200
2010 Mitsubishi Triton L200
2011 Mitsubishi Triton L200
2012 Mitsubishi Triton L200
2013 Mitsubishi Triton L200
2014 Mitsubishi Triton L200
2015 Mitsubishi Triton L200
2016 Mitsubishi Triton L200
2017 Mitsubishi Triton L200
2018 Mitsubishi Triton L200
2019 Mitsubishi Triton L200
2020 Mitsubishi Triton L200
2021 Mitsubishi Triton L200
2022 Mitsubishi Triton L200
2023 Mitsubishi Triton L200
2024 Mitsubishi Triton L200
7 reviews for Dobinsons GS43-801 Shocks Pair | Isuzu D-Max Mazda BT-50
You must be logged in to post a review.
You may also like…
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons GS21-470 Struts Pair | Isuzu D-Max Mazda BT-50
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Photo for illustration purposes
(5 reviews)
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons MRA59-A700 3-Way Adjustable MRA Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- The more you lift it, the less droop you will have left in the front end
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
(18 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS29-420 Pair of Front Shocks for Jeep XJ, Cherokee ZJ Grand Cherokee and TJ Wrangler
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-420 specification: 558mm extended, 335mm compressed
(6 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons GS59-687 4-5″ Rear Shocks Pair for 80 Series Land Cruiser 1990-1997
- Sold as a Pair, suits lifts of 4-5″ or for Long Travel setups – 1990-1997 Toyota Landcruiser 80 Series and Lexus LX450
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-687 Specifications: 680mm extended, 407mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-711 Pair of Rear Shocks for Toyota Tundra 2007-2021
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-711 Specifications are 622mm extended, 380mm compressed, 54mm body size
(6 reviews)
Aaron (verified owner) –
Good quality, really nice.
Jeremy (verified owner) –
Very good customer service, super friendly.
Scott (verified owner) –
Value for money, super satisfied.
Christopher (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Mark (verified owner) –
Good quality, really nice.
Eric (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jose (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.