Dobinsons TB43-200 Torsion Bar Pair for Mitsubishi

  • Suits the following vehicles:
    • Mitsubishi Montero/Pajero NA – NF 4 Cyl (1983 to 1991)
    • Mitsubishi Montero/Pajero NH, NJ 4 Cyl (1991 to 1994)
    • Mitsubishi Montero/Pajero NF – NG V6 (1988 to 1991)
    • Mitsubishi Montero/Pajero 1991-1994 V6 models
    • Mitsubishi Triton L200 1987-1991
  • TB43-200 measure 1282 mm in total length – check before ordering if you aren’t sure
  • Increased spring rate to improve handling and lift front end
  • Powder coated black for a long lasting finish
  • Replaces OE torsion bars without modification
  • Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
  • Photo for illustration purposes

$305.00

In Stock

Description

Dobinsons TB43-200 Torsion bar set measures 1282mm in total length is suitable for the following vehicles:

  • Mitsubishi Montero/Pajero NA – NF 4 Cyl (1983 to 1991)
  • Mitsubishi Montero/Pajero NH, NJ 4 Cyl (1991 to 1994)
  • Mitsubishi Montero/Pajero NF – NG V6 (1988 to 1991)
  • Mitsubishi Montero/Pajero 1991-1994 V6 models
  • Mitsubishi Triton L200 1987-1991

Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.

Dobinsons TB43-200 torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Dobinsons TB43-200 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

A thick durable powdercoat provides protection against corrosion.

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL

When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

INCREASED SPRING RATE 

Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Simple Fitment

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

Directionally Preset & Scragged

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Durable Powdercoat Finish

A thick durable powdercoat provides protection against corrosion.

Cold Rolled Splines

Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

Vehicle Suitability:

1983 Mitsubishi Montero Pajero
1984 Mitsubishi Montero Pajero
1985 Mitsubishi Montero Pajero
1986 Mitsubishi Montero Pajero
1987 Mitsubishi Montero Pajero
1988 Mitsubishi Montero Pajero
1989 Mitsubishi Montero Pajero
1990 Mitsubishi Montero Pajero
1991 Mitsubishi Montero Pajero
1992 Mitsubishi Montero Pajero
1993 Mitsubishi Montero Pajero
1994 Mitsubishi Montero Pajero

1987 Mitsubishi Triton L200
1988 Mitsubishi Triton L200
1989 Mitsubishi Triton L200
1990 Mitsubishi Triton L200
1991 Mitsubishi Triton L200

Reviews

There are no reviews yet.

Be the first to review “Dobinsons TB43-200 Torsion Bar Pair for Mitsubishi”