You may be interested in…

• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons MRA45-A642 3-Way Adjustable Struts Xterra Frontier Pathfinder R51

  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • External Remote Oil Reservoir with dual speed compression adjustment
  • Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
  • Triple Lip Oil Seal for Superior Lifespan
  • Direct Bolt-on, Fully Rebuildable Design
  • Pre-Charged with Nitrogen, Ready to be Assembled and Installed
  • EDP Surface Protection, 3mm Heavy Duty Wall Thickness
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
  • Due to the Restricted Suspension Geometry, a Maximum of 40mm Lift is Achievable in the Front of this Vehicle.
  • 395mm extended, 266mm compressed
  • FITTING INSTRUCTIONS
  • Instructions on setting coil seat height

  $1,280.00 Add to cart
• 

  • 
  • 
  • 

  Accessories

  Ships FREE !!
  within 48 US States

  Z Automotive Tazer JL Mini Programmer | Wrangler JL + Gladiator JT

  • Fits All 2018-2023 Jeep Wrangler JL Models and 2018-2023 Jeep Gladiator JT Models
  • Adjusts Your Jeep’s Performance After Modifications
  • Features Can Be Accessed Using Dash Display, Using Steering Wheel Buttons to Navigate
  • User-Friendly Design
  • Two Categories of Features – Vehicle Settings and Live Functions (see full list below)
  • Simple to Set Up
  • Simple to adjust settings
  • Covered by a 90-Day Warranty
  • Some examples of features you can change:
    • Adjust for gear ratio changes
    • Adjust for tire size changes
    • Enable/disable TPMS system if you’re running aftermarket wheels
    • Enable backup camera when turn signals are activated
    • Enable/disable Cargo Camera input (8.4 UConnect only)
  • Optional front camera add-on for Jeep JL Wrangler and Gladiator/Wrangler 4XE/392 (Scroll down for specs)
  • Installation Instructions and Manual Transmission Supplement

  **Item is not returnable once opened.  No electronic items sold at exitoffroad.com can be returned once opened.

  $329.00 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrades - Lexus GX460

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | Lexus GX460 Rear

  • Suits Lexus GX460 2010-2023 Rear
  • Also available for the FRONT
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $840.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum UCA’s | Nissan Frontier Xterra Pathfinder

  • Super strong billet aluminum front upper control arms (UCA’s) for Nissan D40 and D41 platforms
  • Suits 2005-2021 Nissan Frontier, 2022-Present Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder R51
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Includes detailed instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart