You may be interested in…
-
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
$269.36 Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the rear of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the axle end
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
$150.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren Bump Stops Front & Rear | Land Cruiser 80 Series
- Suits 1990-1997 Land Cruiser 80 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
- Front Instructions and Rear Instructions
$538.72 Add to cart -
Dobinsons
Dobinsons Front 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the front
$30.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesOVS SCAR Waterproof 10K Winch | Synthetic Rope | Wireless Remote
- Single Line Rated Pull: 10,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 181:1
- DB Output: Low (it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 11/32” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: Aluminum Hawse Fairlead
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 64 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical
$499.99 Read more -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesTimbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- 1″ Extended Bump Stop over stock
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
- NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame. Adding nutserts may be required.
- Click here for instructions
$269.36 Add to cart -
WinchesShips FREE !!
within 48 US StatesWarn 103252 VR Evo 10 Winch 10K | Steel Cable
- Winch; VR10; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Wire Rope; Roller Fairlead; Wired Remote; Planetary Gear Drive
-
Durable, One-Piece Cast-Aluminum Tie-Plate For Added Strength And Durability
- High-Performance Albright Contactor Delivers Maximum Reliability
- IP68-Rated Waterproof Winch Construction Keeps The Elements Out
- Control Packs Can Be Relocated For Low-Profile Installations
- Two-In-One Remote With Wired AND Wireless Options For Ease Of Use And Versatility
- A Powerful Series-Wound Motor And Planetary Gear Train Deliver Faster Line Speed Under Load, With Lower Amp Draw
- Limited Lifetime Warranty On Mechanical Components And Limited 7 Year Warranty On Electrical Components
- Warn Warranty information is all listed here: https://www.warn.com/warranties
- Warn 103252 Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Warn 103252 Line Length (FT): 90 Feet
- Line Material: Steel
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 10000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Roller
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per minute At 10000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 0.354 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
$649.99 Add to cart
Cart totals
Subtotal | $1,064.99 |
---|---|
Shipping |
Shipping to FL. |
Route Shipping Protection | $26.62 |
Tax | $79.87 |
Total | $1,222.48 |