You may be interested in…
-
Ranger 2019+ (US Spec)Ships FREE !!
within 48 US StatesDobinsons IMS Monotube IFP Front Struts Pair | Ford Ranger USA Model 2019-2023
- IMS front struts for 0-3.0″ of lift for Ford Ranger 2019-2023 Models (USA Spec only)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 495mm extended, 350mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 186mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons 1.75″ Light Load or 1.75″ Heavy Load Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
$650.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesWarn 103253 VR Evo 10-S Winch 10K | Synthetic Rope
- Winch; VR10-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
- Black Tactical Look Puts You At The Head Of The Off-Road Pack
- Waterproof Albright® Contactor Control For The Ultimate In Reliability
- One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
- Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
- Powerful, Efficient Series-Wound Motor
- Best-In-Class Load-Holding Cone Brake For Superior Control
- Limited 7 Year Warranty
-
Winch Rating: 10000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 90 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 358 Amp Draw At 1000 Pound
- Gear Reduction Ratio: 218:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 5.2 Feet Per Minute At 1000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
$864.99 Add to cart -
Dobinsons
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
$50.00 Add to cart -
Upper Control ArmsShips FREE !!
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
$1,195.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front IMS Struts Pair | Toyota & Lexus
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesETA is late June 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesOVS SCAR Waterproof 10K Winch | Synthetic Rope | Wireless Remote
- Single Line Rated Pull: 10,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 181:1
- DB Output: Low (it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 11/32” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: Aluminum Hawse Fairlead
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 64 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical
$499.99 Read more
Cart totals
Subtotal | $3,540.98 |
---|---|
Shipping |
Shipping to FL. |
Route Shipping Protection | $88.52 |
Tax | $265.59 |
Total | $4,026.09 |