“Longfield IFS +2.00″ CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460” has been added to your cart. Continue shopping
You may be interested in…
-
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50701 2.2″ IFP Shocks Pair | Toyota and Lexus (0-3″ lift)
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Specifications: 598mm extended, 389mm compressed
(16 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
Trail-Gear
TG Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- TRD Pro models may require different length bolts due to variations from Toyota
- Fits the following applications:
- Toyota Tacoma 2005-2023 (All Engines)
- Toyota FJ Cruiser 2007-2014 (All Engines)
- Toyota 4Runner 2003-2024 (All Engines)
- Lexus GX470 (all years)
- Lexus GX460 (all years)
- Toyota Hilux Vigo (all years)
- Toyota Hilux Revo (all years)
- Toyota Fortuner (all years)
- Made in USA
(9 reviews) -
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
Sale!Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesToyota 4Runner 5th Gen 2010-24 Full Skid Plate Kit Aluminum (5 Pcs) | Non-KDSS
- Suits 2010-2024 Toyota 4Runner 4×4 V6 without KDSS sway bars (see photo for identification)
- Does NOT fit on vehicles with KDSS or those that use a Diff-Drop
- For vehicles with KDSS, go to this OTHER PAGE instead
- The 4Runner Full Underbody Protection Kit (5 Pcs) contains A Front skid plate (534155), a Transmission/Gearbox skid plate (534161), a Transfer Case skid plate (534165), a Fuel Tank skid plate (534172), and an Exhaust skid plate (558180), optional to add bumper Filler Plate (558156).
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the 4Runner’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 34 kg (75 lbs).
- Proudly made in Israel.
(4 reviews) -
Sale!Skid PlatesRCI On Sale Now !!!
RCI Full Skid Plate Package | 2010-2024 Toyota 4Runner
- Suits 2010-2024 Toyota 4Runner
- Includes front, transmission and transfer-case skid plates.
- Optional add-on catalytic converter guards
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- New option to add Catalytic Converter Guards – INSTRUCTIONS
(8 reviews)
Cart totals
| Subtotal | $7,514.67 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $565.95 |
| Total | $8,111.62 |
