You may be interested in…

• 

  • 
  • 

  Dobinsons

  Dobinsons SC59-002 Pair of Strut Top Plates | Tacoma 98-04 + 4Runner 96-02

  • Suits Toyota Tacoma 1st Gen 1998-2004, 4Runner 3rd Gen 1996 to 2002, and Toyota Land Cruiser Prado 90
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Photo is of actual product and parts included
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Assembly Instructions

  $120.00 Add to cart
• 

  Dobinsons

  Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460

  • Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold as pairs
  • Product comes exactly as shown in the photo
  • Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
  • Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
  • Installation instructions

  $120.00 Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  ETA is July 2024

  Dobinsons MRA59-A222 3-Way Adjustable MRA Front Struts

  • Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • 458mm extended length, 335mm compressed
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • Instructions for setting coil seat height

  $1,280.00 Add to cart
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  $95.00 Add to cart
• 

  • 
  • 
  • 

  Bump Stops

  Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra

  • Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
  • Bolts in easily and quickly to replace the firm factory bump stops
  • Includes necessary bump stops (2), goes under the factory u-bolts
  • Made of a super durable micro-cellular polyurethane formula
  • Provides controlled, progressive and comfortable bottoming response from your front suspension
  • Installation Instructions

  $221.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460

  • Complete INNER kit includes 2 new INNER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Great for lifted SUV’s and Trucks with high CV angles
  • Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
  • Interior mold is hex shaped
  • These still install the old fashioned way without custom stretch boot tools needed

  $60.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  $1,150.00 Add to cart
• 

  Dobinsons

  Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Kit includes 2 greasable bolts, as shown in the photo
  • Order 2 kits if you want to replace fixed and shackle end bolts
  • Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+.  See full vehicle list below

   

  $60.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart
• 

  Warn

  Ships FREE !!
  within 48 US States

  WARN 101445 Optional Skid Plate for Elite Bumpers JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
  • Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
  • Meets The Highest Quality Standards
  • Built To Match Your Exact Requirements
  • Easy To Install
  • Limited 1 Year Warranty

  Attributes

  • Location: Under Bumper Mount
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Logo: Warn Logo
  • Installation Type: Bolt-On
  • Includes Hardware: Yes
  • Drilling Required: No
  • Estimated Install Time (Hours): 0.5

  $265.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460

  • Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Great for lifted SUV’s and Trucks with high CV angles
  • Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
  • Inside shape is round
  • These still install the old fashioned way without custom stretch boot tools needed

  $60.00 Add to cart
• 

  Tundra 2nd Gen (2007-2021)

  Dobinsons Greasable Tundra Leaf Spring Bushing Kit | Tundra 2007-2021

  • Suits 2007-2021 Toyota Tundra
  • For any lift height, or no lift. These are OE replacement bushings
  • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
  • Pressing of OE bushings may be necessary during removal and installation
  • Replaces OE bushings in all 6 positions of rear leaf springs
  • Each half bushing has a part number on it.  Here’s the orientation of them:
    • The PB59-1540 go in the front position, towards the front of the vehicle
    • The PB59-1503 go in the shackle end of the leaf spring
    • The PB59-1514 go in the top of the shackle, on the chassis to shackle mount

  $115.00 Add to cart