Trail Gear 304385-1-Kit 80 Series Extended Brake Line Kit

80 Series Extended Brake Line Kit for 1993-1997 w/ABS up to 6″ lift

  • Suits 1993 to 1997 80 Series Land Cruisers and 1993 to 1997 Lexus LX450 with ABS Brakes
  • Extended brake line kit to suit lift heights of up to 6″
  • Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
  • Permanently Crimped Zinc-Plated Fittings
  • Includes 2 front and 1 rear extended brake line
  • Includes Retention Clips
  • Meets DOT MVSS-106
  • Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
  • Instructions

$170.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: TG-304385-1-KIT Categories: , , , , , Brand:

Description

Trail Gear 80 Series Extended Brake Line 1993-1997 FJ80 Land Cruiser / Lexus LX450 & 1998-2007 FJ105 Land Cruiser Extended Brake Line Kit

Trail-Gear DOT approved FJ80 Land Cruiser Extended Brake Line Kits are suitable for all 1993-1997 FJ80 Land Cruisers with up to 6″ [152mm] of lift. These brake lines are constructed from extruded PTFE (Teflon) hose with permanently crimped zinc-plated steel fittings. The brake hose is protected from debris and abrasion by a braided stainless steel wire cover. A clear PVC outer jacket provides additional protection against debris, abrasion, and corrosion.

These 80 Series Extended Brake Line Kits are a direct fit and exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106. They come in a complete set of two front brake lines and one rear brake line along with four retention clips and installation instructions.

Note: These will not fit FJ100 Land Cruisers (100 Series), and there is a different kit for 1990-92 models.

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

 

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

To begin your warranty claim:

    • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
    • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.  Ship all products to:
      ATTN: WARRANTY
      5356 E. Pine Avenue
      Fresno, CA 93727.
    • Please place a clearly marked copy of the original invoice inside the package.
    • Please include a short note stating the problem you are experiencing.

 

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Vehicle Fitment:

1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series

Related products

  • Dobinsons Square Top Ubolts
    Suspension

    Dobinsons Rear U-Bolts – UB59-667K (2 Pairs)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • Photo for illustration purposes only.  These are square at the top
    • For Nissan Frontier D41 2022+ models, these UB59-667K suit the L59-002-R leaf springs only.  The heavier rated springs need the UB59-453-2K U-bolts.
    $90.00 Add to cart
    • Dobinsons GS59-221 struts installed on a Tacoma
    • Dobinsons Twin Tube Shocks features and benefits
    Dobinsons

    Dobinsons GS59-221 Pair Front Struts | FJ to 09 Tacoma 05-23 4Runner 03-09 GX470
    • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
    • Superior Design, thicker walls, longer travel
    • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
    • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
    • Matched to compliment Dobinsons Complete Suspension Systems
    • Dobinsons GS59-221 specifications: 540mm extended, 420mm compressed, 50mm body size
    • Offered in Yellow or Black
    $350.00 Select options
  • Dobinsons MRA Strut
    On Backorder
    • Dobinsons MRA Strut
    • Tacoma front MRR MRA
    • Dobinsons RM59-004 Tacoma Resi Mounts for MRA coilovers
    Exceptions
    Ships FREE !!
    within 48 US States
    ETA is Summer 2024

    Dobinsons MRA59-A220 3-Way Adjustable MRA Front Struts Extended Travel
    • Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
    • 3-way adjustable valving – adjust high and low speed compression and rebound
    • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
    • Extended Travel – 567mm extended, 417mm compressed
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 50mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • Direct Bolt-On Design
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design
    • SOLD IN PAIRS
    • Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
    • Resi brackets bolt in between the stock front sway bar mount
    • Full 2 year limited warranty, no set rebuild time period
    • Does not include coil springs or top mounts – sold separately
    • Instructions for setting coil seat height
    • Resi installation instructions
    $1,280.00 Add to cart
  • Dobinsons MRA59-A682 MRA59-A685 MRA59-A687
    • Dobinsons MRA59-A682 MRA59-A685 MRA59-A687
    • Dobinsons MRA59-A682 installed
    • dobinsons mra
    Suspension
    Ships FREE !!
    within 48 US States

    Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift
    • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
    • 3-way adjustable valving – Adjust high and low speed compression and rebound
    • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 60mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design
    • SOLD IN PAIRS
    • Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
    • Full 2 year limited warranty, no set rebuild time period
    • 714mm extended, 440mm compressed
    • Installation Instructions of the MRA Shocks
    $1,350.00 Add to cart