You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60713 IFP Rear Shocks Pair | Toyota Sequoia 2008-2022

  • Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
  • Note: the video shows an IMS front strut that takes a coil.  This listing is for the rear IMS shock, no adjustability.

  $650.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• Sale!

  

  • 
  • 
  • 

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Sequoia 2nd Gen (2008-2022)

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022

  • Suits Toyota Sequoia 2008-2022
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period

  $1,350.00 Add to cart