2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop
Ships FREE !!
within 48 US States

2016-23 Tacoma Steel Low Profile Front Bumper – Center Hoop

  • Suits 2016-2023 Toyota Tacoma
  • Ships in bare steel.  You powder coat or paint it after you receive it
  • This design allows you to keep the look of the OEM bumper while adding new high-quality features
  • This bumper provides an increased approach angle in the front
  • Made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate
  • We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
  • It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
  • This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
  • Made in the USA
  • Installation Instructions
  • Also available without the center hoop attached

$779.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: AP-310168 Categories: , , , , , , Brand:

Description

2016+ Tacoma Low Profile Front Bumpers

All-Pro Off-Road’s 2016+ Tacoma Low Profile Front Bumper is designed to fulfill the demand for a durable, low-profile bumper that looks as good as it functions. This design allows you to keep the look of the OEM bumper while adding new high-quality features. This bumper provides an increased approach angle in the front and paired with our All-Pro skid plates will provide increased protection for your undercarriage. The body of this steel bumper is made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate provides a solid mounting structure to your frame. We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate. This bumper is available with a hoop option and integrated light mounting tabs for pod lights. It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less. This bumper is also compatible with most 8-12k winches with a remote mount solenoid box.

MADE IN USA

2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop 2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop 2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop 2016-23 Tacoma Steel Low Profile Front Bumper - Center Hoop

Additional information

Weight 98.5 lbs

Related products

  • Dobinsons front coil springs in teal color
    • Dobinsons front coil springs in teal color
    • Black Dobinsons Coils color
    • Red Dobinsons Coils color
    Suspension

    Dobinsons C59-350 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • Sold in Pairs
    • 380mm free height, 18mm wire diameter, 730LB/IN Spring Rate
    $270.00 Select options
  • Dobinsons 2.2 inch Hydraulic Bump Stop IFS Weld on Mount Kit IFS Hydro Bump Stop
    • Dobinsons 2.2 inch Hydraulic Bump Stop IFS Weld on Mount Kit IFS Hydro Bump Stop
    • Dobinsons Hydraulic 2.2 inch Bump Stops - HBS56-009 installed
    Bump Stops
    Ships FREE !!
    within 48 US States

    Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
    • Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
    • Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
    • HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
    • CNC Machined 50mm Billet Aluminum Piston
    • EDP Coated 3mm Thick 56mm Steel Body
    • Threaded Body For Height Adjustment
    • Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
    • 30mm Micro Polished Hard Chrome Shaft
    • Slow Rebound Valving To Prevent Bucking
    • Removable Dust Cover Boot For Stealth Appearance
    • Fully Rebuildable & Tunable
    • O-Ring Travel Indicator
    • Heavy Duty Extreme-Race style Triple Seal Design
    • Nitrogen Gas Charged & Tunable (100 to 300 PSI)
    • Pre-charged to 150 PSI
    • Extra Short Dead Lengths For Compact Fitment
    • Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
    • Cans have 3mm walls for increased strength
    • Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
    • Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
    • Custom fitting and welding is required
    • Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
    From $1,090.00 Select options
  • Dobinsons MRA Shock Cutout
    • Dobinsons MRA Shock Cutout
    • Tacoma rear MRR MRA
    • dobinsons mra
    Suspension
    Ships FREE !!
    within 48 US States

    Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
    • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 50mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMITM CNC machined components for precise tolerances
    • Parker Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
    • EDP Surface Protection, Direct Bolt-On Design
    • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
    • 14.2″ compressed length, 24.2″ extended length
    • Installation Instructions
    • Works with factory brake line length and OE bump stop length, no extensions required
    • Includes reservoir brackets and hardware
    • SOLD IN PAIRS
    $1,150.00 Add to cart
  • Dobinsons Square Top Ubolts
    Tacoma 3rd Gen (2016-2023)

    Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • Suits Toyota Tacoma 2005-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
    • Photos for illustration purposes.  These are square at the top
    • These U-bolts are 180mm in length.  If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
    $90.00 Add to cart