Your cart is currently empty!
within 48 US States
Apex 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Apex Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
- All-Pro Apex Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
$1,199.00
In StockDescription
Apex 2005-2023 Toyota Tacoma Rock Sliders
All-Pro APEX Tacoma Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube. Our APEX Tacoma Rock Sliders feature an innovative, one-piece mounting plate that runs down the frame, adding support to the weaker C-channel portion of the Tacoma’s frame while allowing for an easier bolt-on installation. Tacoma Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks. Pinch flange notching may be required due to slight variations between vehicles, and minimal drilling is needed for proper installation.
For the APEX Tacoma rock sliders legs, All-Pro uses fully gusseted 2″ square legs due to their higher resistance to bending when compared to round tubing. In fact, the square legs are 1.7 times more resistant to bending than our 2″ round legs. To get the equivalent strength out of round tubing, 3″ would have to be used, and there simply isn’t enough room to do that. The legs run from the mounting points to the outer structure and are one of the most important parts of the slider to ensure a long life without the worry of bending. The square legs are more expensive, but the extra cost pays off for the user for years to come. The square tubing also provides more surface area to be welded to the mounting plate which, again, just adds to the overall strength. Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
Available bare metal or finished in black powder coat. Choose your finish.
Vehicle Suitability:
2005 Toyota Tacoma Sliders
2006 Toyota Tacoma Sliders
2007 Toyota Tacoma Sliders
2008 Toyota Tacoma Sliders
2009 Toyota Tacoma Sliders
2010 Toyota Tacoma Sliders
2011 Toyota Tacoma Sliders
2012 Toyota Tacoma Sliders
2013 Toyota Tacoma Sliders
2014 Toyota Tacoma Sliders
2015 Toyota Tacoma Sliders
2016 Toyota Tacoma Sliders
2017 Toyota Tacoma Sliders
2018 Toyota Tacoma Sliders
2019 Toyota Tacoma Sliders
2020 Toyota Tacoma Sliders
2021 Toyota Tacoma Sliders
2022 Toyota Tacoma Sliders
2023 Toyota Tacoma Sliders
ALL-PRO products are warranted to be free from defects in materials and workmanship prior to installation. Any alteration, improper use, or modification will void this warranty. This warranty is extended by All-Pro to the original purchaser. This warranty is effective for 90 days from the date of purchase. Any description of the goods is for the sole purpose of identifying them, is not a part of the bargain, and does not constitute a warranty that the goods will conform to that description. Any sample, model or advertised item is for illustrative purposes only, is not part of the basis for the bargain, and is not to be construed as a warranty that the good will conform to the sample, model, or advertised item. No affirmation of fact or promise made by All-Pro will constitute a warranty that the goods will conform to the affirmation or promise.
Purchasers and users of our products are responsible for determining the applicability of a product to their specific application. In the event of a defect, malfunction, or failure to conform to this warranty, All-Pro will repair or replace the goods without charge within 30 days of receipt of goods. If All-Pro is unable to replace and/or repair the goods or if All-Pro, at its sole discretion, determines that neither option is commercially practicable or cannot be made within 30 days of receipt of the goods, All-Pro will refund the purchase price. The purchaser is responsible for installation and removal of all parts, freight or shipping costs, and incidental or consequential damages.
2005-APEX
TOYOTA TACOMA ACCESS CAB LONG BED or DOUBLE CAB SHORT BED
(2005-2023)
AP-306639
TOYOTA TACOMA DOUBLE CAB LONG BED
(2005-2023)
Related products
-
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
$165.00 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
Dobinsons
Dobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boots to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
- Available in Yellow or Black
- Sold in pairs
$310.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
$1,150.00 Add to cart