Your cart is currently empty!
Bilstein 24-318600 Rear 6100 Series Strut for Ford Bronco
- Bilstein 6100 Series Ride Height Adjustable REAR Shock Absorber
- Suits 2021+ Ford Bronco 2-door and 4-door
- Works with With Sasquatch Package ONLY : 0.1.1″ Rear Lift Height
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Type:Â Nitrogen Gas Charged
- Body Diameter: 60mm
- With Coil Spring: No
- Internal Design:Â Monotube
- Adjustable Valving:Â No
- Extended Length (IN): 25.55 Inch
- Compressed Length (IN): 17.11 Inch
- Upper Mounting Style:Â Stud
- Lower Mounting Style:Â Cross Pin
- Body Color:Â Silver
- Quantity:Â Single
- Valving Type:Â Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material:Â Steel
- Body Material:Â Steel
- With Reservoir:Â No
- Includes Dust Shield:Â No
- Includes Hardware:Â Yes
- Includes Boot:Â No
- Estimated Install Time (Hours):Â 0.5
- To be used with the stock coil spring the vehicle came with
- Installation Instructions
- Matching front strut
$325.00
In Stock
EAN: 651860887531
SKU: 24-318600
Categories: Bilstein, Bronco (2021-2024+), Shocks + Coilovers - Bronco 2021+, Struts and Shocks, Suspension
Brand: Bilstein
Description
SPECIFICATIONS
- Rear Lift Height: 0-1.1″ – With Sasquatch Package Only
- Body Diameter: 60mm
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 25.55 Inch
- Compressed Length (IN): 17.11 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- Valving Type: Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material: Steel
- Body Material: Steel
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: No
- Estimated Install Time (Hours): 0.5
- WARRANTY INFORMATION
Bilstein 24-318600 PRODUCT OVERVIEW
Bilstein 24-318600 B8 6100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV’s with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing an adjustable ride height range of 0-3 inches (depending on application). The B8 6100 (Ride Height Adjustable) utilizes a large 60mm digressive piston. This will provide a smoother ride while offering more control over rough terrain. The B8 6100 (Ride Height Adjustable) will provide increased durability and heat dissipation, making them perfect for vehicles subjected to rugged roads and harsh conditions.
Bilstein 24-318600 FITS THE FOLLOWING:
- 2021-2024 Ford Bronco 2-door and 4-door with Sasquatch Package ONLY (not Bronco Sport)
MANUFACTURER
While the ThyssenKrupp Bilstein Company began as a German enterprise, Bilstein shocks are developed and manufactured in Hamilton, Ohio. Bilstein develops and fabricates premium quality monotube shock absorbers directly for automobile manufactures, aftermarket outfits and motorsports applications. The precision and craftsmanship in manufacturing that fueled company growth in Germany were brought straight to the factory in Hamilton, Ohio. The factory includes an engineering department, rigorous shock testing facility and a motorsports track. The track allows the engineers to tweak their designs in response to real world testing during development. The rigorous testing allows for designs to go through a machine simulated life of a shock absorber in all kinds of terrain conditions. The resulting products promise the highest in performance
Bilstein 6100s for new Ford Bronco
Vehicle Suitability:
2021 Ford Bronco
2022 Ford Bronco
2023 Ford Bronco
2024 Ford Bronco
3 reviews for Bilstein 24-318600 Rear 6100 Series Strut for Ford Bronco
You must be logged in to post a review.
You may also like…
-
SPCFREE SHIPPING
within 48 US StatesSPC 25690 | Ford Bronco UCA Set 2021-2024+
- Suits Ford Bronco 2021-2024+
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- Arm will get you -2.0° to +2.00° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
(13 reviews) -
Bronco (2021-2024+)
Bilstein 24-318594 Front 6100 Series Strut for Ford Bronco
- Bilstein 6100 Series Ride Height Adjustable Shock Absorber
- Suits 2021+ Ford Bronco 2-door and 4-door
- Works with With Sasquatch Package ONLY : 0.7-2.3″ Lift Height
- SOLD INDIVIDUALLY, BUY 2 FOR 1 VEHICLE
- Photo shows what is included
- Type:Â Nitrogen Gas Charged
- Body Diameter: 60mm
- With Coil Spring: No
- Internal Design:Â Monotube
- Adjustable Valving:Â No
- Extended Length (IN):Â 22.8 Inch
- Compressed Length (IN):Â 16.62 Inch
- Upper Mounting Style:Â Stud
- Lower Mounting Style:Â Cross Pin
- Body Color:Â Silver
- Quantity:Â Single
- Valving Type:Â Non Adjustable Valving
- Ride Height Adjustable: Yes
- Rod Material:Â Steel
- Body Material:Â Steel
- With Reservoir:Â No
- Includes Dust Shield:Â No
- Includes Hardware:Â Yes
- Includes Boot:Â No
- Estimated Install Time (Hours):Â 0.5
- To be used with the stock coil spring the vehicle came with
- Installation Instructions
(3 reviews)
Related products
-
Sale!Tacoma 3rd Gen (2016-2023)On Sale All November!!
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Sale!Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons Rear U-Bolts for Toyota Tundra 2007-21 (UB59-437K) (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- These are a 30mm longer version of UB59-453-2K Ubolts
- Photo for illustration purposes. These are square at the top
(7 reviews) -
DobinsonsOn Sale All November!!ETA is early JAN 2025
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews)
Shawn (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Brandon (verified owner) –
Just what I needed.
Nicholas (verified owner) –
Just what I needed.