Bilstein 5100 Series Shock Kit for Ford Bronco

Bilstein 5100 Series Ride Height Adjustable Shock Absorber Kit for front and rear
Suits 2021+ Ford Bronco 2-door and 4-door
Front Lift Height Without Sasquatch Package: 1-2.9″; With Sasquatch Package: 0-1.7″
Rear Lift Height Without Sasquatch Package: 1-2.5″; With Sasquatch Package: 0-1.4″
SOLD AS A KIT, INCLUDES 4 STRUTS FOR FRONT AND REAR
Type: Nitrogen Gas Charged
With Coil Spring: No
Internal Design: Monotube
Adjustable Valving: No
Strut length specs are down below
Body Color: Silver
Quantity: 4 Struts
Valving Type: Non Adjustable Valving
Ride Height Adjustable: Yes
Rod Material: Steel
Body Material: Steel
With Reservoir: No
Includes Dust Shield: No
Includes Hardware: Yes
Includes Boot: No
Spring Seat: Use Original
Estimated Install Time (Hours): 3
Reuse original coil springs and strut mounts
Installation Instructions

On Sale for $628

In Stock

Front 5100 Struts (Pair)

Rear 5100 Struts (Pair)

SKU: BIL5100KIT-BRONCO Categories: Bilstein, Bronco 2021-2024+, Exceptions, Full Suspension Kits, Full Suspension Kits - Bronco 2021+, Shocks + Coilovers - Bronco 2021+, Struts and Shocks, Suspension Brand: Bilstein

Description

Description

SPECIFICATIONS FOR FRONT STRUTS

Front Lift Height Without Sasquatch Package: 1-2.9″; With Sasquatch Package: 0-1.7″
Type: Nitrogen Gas Charged
With Coil Spring: No
Internal Design: Monotube
Adjustable Valving: No
Extended Length (IN): 22.8 Inch
Compressed Length (IN): 16.62 Inch
Upper Mounting Style: Stud
Lower Mounting Style: Cross Pin
Body Color: Silver
Quantity: Single
Rod Diameter (IN): 1.81 Inch
Valving Type: Non Adjustable Valving
Ride Height Adjustable: Yes
Rod Material: Steel
Body Material: Steel
With Reservoir: No
Includes Dust Shield: No
Includes Hardware: Yes
Includes Boot: No
Estimated Install Time (Hours): 0.5
To be used with the stock coil spring the vehicle came with
WARRANTY INFORMATION

SPECIFICATIONS FOR REAR STRUTS

Rear Lift Height Without Sasquatch Package: 1-2.5″; With Sasquatch Package: 0-1.4″
Type: Nitrogen Gas Charged
With Coil Spring: No
Internal Design: Monotube
Adjustable Valving: No
Extended Length (IN): 25.55 Inch
Compressed Length (IN): 17.11 Inch
Upper Mounting Style: Stud
Lower Mounting Style: Cross Pin
Body Color: Silver
Quantity: Single
Rod Diameter (IN): 1.81 Inch
Valving Type: Non Adjustable Valving
Ride Height Adjustable: Yes
Rod Material: Steel
Body Material: Steel
With Reservoir: No
Includes Dust Shield: No
Includes Hardware: Yes
Includes Boot: No
Estimated Install Time (Hours): 0.5
To be used with the stock coil spring the vehicle came with

Bilstein PRODUCT OVERVIEW

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

Bilstein 5100 KIT FITS THE FOLLOWING:

2021-2023 Ford Bronco 2-door and 4-door (not Bronco Sport)

MANUFACTURER

While the ThyssenKrupp Bilstein Company began as a German enterprise, Bilstein shocks are developed and manufactured in Hamilton, Ohio. Bilstein develops and fabricates premium quality monotube shock absorbers directly for automobile manufactures, aftermarket outfits and motorsports applications. The precision and craftsmanship in manufacturing that fueled company growth in Germany were brought straight to the factory in Hamilton, Ohio. The factory includes an engineering department, rigorous shock testing facility and a motorsports track. The track allows the engineers to tweak their designs in response to real world testing during development. The rigorous testing allows for designs to go through a machine simulated life of a shock absorber in all kinds of terrain conditions. The resulting products promise the highest in performance

Bilstein 5100s for new Ford Bronco

Related products

Dobinsons
Dobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 2010+ 4Runner 2010+ GX460
- Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
- Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat. They are also longer than stock for taller lifts
- Example: Use a 2″ lift spring with these struts to get 3″ of lift
$350.00 Select options
Suspension
Dobinsons Rear U-Bolts – UB59-667K (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are square at the top
- For Nissan Frontier D41 2022+ models, these UB59-667K suit the L59-002-R leaf springs only. The heavier rated springs need the UB59-453-2K U-bolts.
$90.00 Add to cart
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
$305.00 Select options
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart