Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dirt King 2.0 IFP Smooth Body Shocks Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Allows for up to 1.5″ lift
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- What’s Included:
- 2.0” IFP smooth body shocks Pair
- Shock shaft boots
- All necessary mounting hardware
- Installation instructions
- Matching front coilovers
$538.02
In Stock
SKU: DK-811885R
Categories: Dirt King Fabrication, Shocks + Struts - Tacoma 2nd Gen, Shocks + Struts - Tacoma 3rd Gen, Struts and Shocks, Suspension, Tacoma 2nd Gen (2005-2015), Tacoma 3rd Gen (2016-2023)
Brand: Dirt King Fabrication
Description
The Dirt King 2.0 IFP Tacoma rear shocks for the Toyota Tacoma were developed to complement the Dirt King 2.0 IFP front coilovers. These shocks improve your vehicle’s handling and comfort, both on-road and off-road. While they may not reach the peak off-road performance of the Dirt King 2.5 DCA series shocks, the 2.0 IFP shocks far exceed OE shocks in performance. They provide a smoother ride over rough terrains such as washboards, potholes, and large dips. These shocks also offer increased wheel travel, resulting in higher articulation and better bottom out control. Integrating these rear shocks with the Dirt King 2.0 IFP front coilovers on your Tacoma delivers a balanced and responsive driving experience.
IFP Tacoma Shocks Suitability:
2005-2023 Toyota Tacoma 2WD/4WD
IFP Tacoma Shocks Specifications
- 2″ hard-anodized 6061 aluminum bodies
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Allows up to 1.5″ of lift
What’s Included
- 2.0” IFP smooth body shocks
- Shock shaft boots
- All necessary mounting hardware
- Installation instructions
IFP Tacoma Shocks Features
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
Disclaimer
All products sold or manufactured by Dirt King are intended for off-road use only. Our products are strictly engineered and tested and are not to be modified from their original design in any way. Welding should always be done at a qualified and certified facility only. Customer assumes all liability in assuring that parts are installed correctly, maintained, and not modified or altered in any way. Dirt King is not responsible or liable for any accidents, injuries, or deaths that may occur from the use of any products offered. Suspension modifications may change the dynamics and stability characteristics of the vehicle. Ensuring prompt wheel alignment and ADAS recalibration after suspension modifications is critical and the sole responsibility of the customer.
Vehicle Fitment:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma
Additional information
| Weight | 40 lbs |
|---|---|
| Dimensions | 44 × 8 × 6 in |
4 reviews for Dirt King 2.0 IFP Smooth Body Shocks Pair | Tacoma 2005-2023
You must be logged in to post a review.
You may also like…
-
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.0 IFP Tacoma Coilovers Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Comes preset to 2.5″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.0 Dirt King IFP Series coilovers Pair
- Coils installed are 14” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts
- Spanner wrench to adjust height/preload
- All necessary mounting hardware
- Installation instructions
(4 reviews) -
DobinsonsOn Sale All November!!ETA is late December
Dobinsons IMS59-50940 Rear 2.2″ IFP Shocks Pair | 2005-23 Tacoma 00-06 Tundra
- Suits Toyota Tacoma 2nd and 3rd Gen, 2005-2023, and Toyota Tundra 1st Gen 2000-2006
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specification – 14.2″ compressed length, 24.2″ extended length
- Full 2 year limited warranty, no set rebuild time period
(12 reviews)
Related products
-
Sale!BushingsOn Sale All November!!
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews)
Patrick (verified owner) –
It’s exactly what I wanted.
Steven (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Michael (verified owner) –
Would definitely buy from this site again.
Matthew (verified owner) –
It’s exactly what I wanted.