Your cart is currently empty!
Dobinsons ±2 ½ – 3° Caster Bushing Kit for Suzuki Jimny
- Suits Suzuki Jimny 1998-2017 and 2018+
- High quality rubber, producing the highest ride quality
- Adjustable during installation to offer ±2 ½ – 3° of caster adjustment
- Replaces OE bushes holding front and radius arms to the axle
- Order 2 for 1 vehicle to change it all
- Raising Vehicle Will Effect Wheel Alignment. It is Recommended that this Castor Adjustment Kit to be Fitted and a Wheel Alignment Carried Out.
- Installation Instructions
$185.00
In Stock
EAN: 9332670043607
SKU: WA57-511K
Categories: Bushings, Caster and Alignment, Dobinsons, Jimny (1998-2017), Jimny (2018+), Suspension
Brand: Dobinsons Spring & Suspension
Description
Dobinsons WA57-511K – Dobinsons Spring & Suspension fixed rubber front and rear radius arm caster kit, variable up to ±2 ½ – 3° of caster adjustment, suitable for 0″ to 2″ of lift. Includes 4 x Rubber Eccentric Bushes in 1 kit of WA57-511K.
Caster angle plays a major part in vehicle straight line stability and helps the steering to return to center. If the vehicle’s suspension has been raised, the required positive castor angle is reduced and the castor angle moves closer to zero, impairing the vehicles steering stability. A wheel alignment done by a reputable 4×4 wheel alignment center can determine whether caster correction is required.
We offer a full variety of suspension components for this vehicle, including replacement bushings for all control arms front and rear.
For most suspension lifts, caster correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application.
For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Caster correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.
Note: For Off Road Use Only
WORLD’S LARGEST RANGE
Dobinsons Spring & Suspension™ established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. The success of the business has come about by providing quality products, acquiring and using technical knowledge and having the equipment to perform and provide professional service.
Dobinsons Spring & Suspension™ pride themselves on having the world’s largest range of 4×4 spring and suspension componentry. This extensive range can be viewed using their online catalogues or selecting online.
Their quality of design and manufacture is what sets Dobinsons apart from their competitors, if not the price. The company manufactures and repairs a large range of springs and sells a comprehensive range of suspension components.
Dobinsons Spring & Suspension™ have been exporting their products to different parts of the world and their name has become synonymous with quality in these countries. Learn more about Dobinsons
3 reviews for Dobinsons ±2 ½ – 3° Caster Bushing Kit for Suzuki Jimny
You must be logged in to post a review.
Related products
-
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews)
Christopher (verified owner) –
Very good customer service, super friendly.
David (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Mark (verified owner) –
I received it really fast.