Dobinsons 1.5 to 3.5 inch Ford Bronco MRA Suspension Kit

Dobinsons 1.5 to 3.5 inch Rear MRA Bronco Coilovers

Ships FREE !!
within 48 US States

Dobinsons 1.5-3.5″ Ford Bronco MRA 3-Way Adjustable Kit

Complete Dobinsons Suspension Kit for a Ford Bronco 2-Door or 4-Door Models 2021-2024+
Will not suit Bronco Sport
Choose all the parts down below to match your vehicle and needs, and also see the recommended parts to add on for a fuller kit
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
Coils are teal or black. Struts are black
All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
Fully rebuildable and re-valvable
FRONT AND REAR COILOVERS ARE PRE-ASSEMBLED AND READY TO BOLT IN
3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
20 Stage Low Speed Compression – For creepy crawling and cornering
15 Stage Rebound – Control your coils, prevent bucking
60mm CNC Machined High Flow Billet Aluminum Race Piston
3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMI™ CNC machined components for precise tolerances
Parker™ Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Design
Includes Reservoir Brackets and Hardware, and Adjuster Wrench
Full 2 year limited warranty, no set rebuild time period
Includes front lower mount spacer for proper clearance to CV axle – must be installed!!
Uses Dobinsons MRA19-A104 and MRA19-A105 struts with Dobinsons coils
Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
New UCA’s are required for proper coilover and hose clearance, see all options
Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit should be added for coilover clearance

From $4,370.00

In Stock

Select Vehicle Door Count

This is important, as the coils are different for each model

Front Coilovers

Rear Coilovers

Select Coil Spring Color for Front and Rear

Choose which color you would prefer, applies to Front and Rear. If that is not available, we will reach out with an ETA or alternatives

Front Sway Bar Relocation Kit

This is required and should be added with the Dobinsons MRA's for proper clearance and sway bar operation, as long as you're running a sway bar

Front UCA's

New UCA's allow for proper alignment as well as clearance around the coilover and hose. You must run new higher clearance UCA's with the Dobinsons MRA front coilovers

Rear Lower Control Arms

For added strength and also pinion angle adjustment, these are a great upgrade for those who hit it hard offroad

Rear Upper Control Arms

Again, for added strength and also pinion angle adjustment, these are a great upgrade for those who hit it hard offroad

Rear Panhard Rod

To correct the axle positioning when centered, an adjustable panhard rod allows the alignment tech to properly center it when the vehicle has been lifted. Recommended at 2" of lift or more

SKU: BRONCOMRAKIT Categories: Bronco 2021-2024+, Dobinsons, Full Suspension Kits, Full Suspension Kits - Bronco 2021+, Suspension Tags: c19-568, c19-570, c19-571V, c19-573v, MRA19-A104, mra19-a105 Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons 3-Way Adjustable Ford Bronco MRA Suspension Kit, for Ford Bronco 2 or 4 door 2021+ models, this setup allows you to order a set of Dobinsons MRA coilovers for the front and rear pre-assembled so that they can bolt right into your rig. With a massive 2.6″ body, these will give you the excellent on and off-road performance you’re looking for. Lift your Ford Bronco and bolt in these Dobinsons MRA Bronco Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front and rear end of your vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.

Dobinsons Ford Bronco MRA Suspension Kit includes pre-assembled Coilovers – MRA Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRA Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.

The Dobinsons Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.

The Dobinsons Ford Bronco MRA Suspension Kit Features:

10 High Speed Compression Adjustments

20 Low Speed Compression Adjustments

15 Rebound adjustments

What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

Check out all the options for your Ford Bronco here: https://exitoffroad.com/product-category/ford/bronco-2021/

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Vehicle Suitability:

2021 Ford Bronco 4 Door
2022 Ford Bronco 4 Door
2023 Ford Bronco 4 Door
2024 Ford Bronco 4 Door

2021 Ford Bronco 2 Door
2022 Ford Bronco 2 Door
2023 Ford Bronco 2 Door
2024 Ford Bronco 2 Door