Your cart is currently empty!
Dobinsons 0-2.5″ Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Original price was: $1,840.00.$1,564.00Current price is: $1,564.00.
In StockC59-300 - lighter spring rate - 586LB - 1.75" with stock weight - Using these REQUIRES buying upper coil isolator adapters below
C59-302 - lighter spring rate - 586LB - 2.5" with stock weight - Using these REQUIRES buying upper coil isolator adapters below
C59-344 - heavier spring rate - 651LB Rate - 1.75" Lift
Description
Sequoia IMS Suspension Kit – Dobinsons offer this complete 0-2.5″ suspension system for the 1st Gen Toyota Sequoia 2001 to 2007 4×4 models with the 4.7L V8 looking to freshen up their suspension as well as add ground clearance.
Choose what lift height and parts you would like from the drop down menus
For all individual Sequoia IMS Suspension Kit components, click this link here to see them all: https://exitoffroad.com/product-category/toyota/sequoia/sequoia-1st-gen/
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsons™ Sequoia IMS Suspension Kit coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment. Coated with a durable vibrant powder coat for years of long lasting rust prevention.
Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance – Enjoy the ride
2001 Toyota Sequoia Lift Kit
2002 Toyota Sequoia Lift Kit
2003 Toyota Sequoia Lift Kit
2004 Toyota Sequoia Lift Kit
2005 Toyota Sequoia Lift Kit
2006 Toyota Sequoia Lift Kit
2007 Toyota Sequoia Lift Kit
13 reviews for Dobinsons 0-2.5″ Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
You must be logged in to post a review.
You may also like…
-
TimbrenFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
SPCFREE SHIPPING
within 48 US StatesTake 10% off with Coupon
Code "BLACKFRIDAY"!!SPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair
- Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
(11 reviews)
Thomas (verified owner) –
Value for money, super satisfied.
Jesse (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bryan (verified owner) –
Just what I needed.
Jacob (verified owner) –
I received it really fast.
Ryan (verified owner) –
Good quality, really nice.
Stephen (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Nicholas (verified owner) –
I received it really fast.
Travis (verified owner) –
I received it really fast.
Christopher (verified owner) –
Value for money, super satisfied.
Charles (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Patrick (verified owner) –
Good quality, really nice.
Bryan (verified owner) –
Good quality, really nice.
Stephen (verified owner) –
It’s exactly what I wanted.