Dobinsons 2.0″ IMS Lift Kit Toyota Tacoma 1998 to 2004 with Blocks or AAL

Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to the additional accessory load (weight) on the vehicle
Fully re-buildable and re-valvable shocks
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore – for the ultimate in offroad handling
56mm/2.2” Bodied Series
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel

From $1,500.00

In Stock

Select Front Coil Springs

C59-276 – 1.5″ with stock weight (Teal or Black only)
C59-134 – 1.5″ with bumper and winch
C59-134 – 2.0″ with stock weight

Select Coil Spring Color

Choose what color you would like. If that is not available, we will reach out with an ETA and other options in stock

Select Front Struts

Select Rear Shocks

Select Dobinsons Quick Ride Kit

If you'd like to use the Dobinsons block and u-bolt kit, select which one here

Select Wheeler's Add-A-Leaf Kit

If you'd prefer to use a Wheeler's Add-A-Leaf Kit instead of Dobinsons quick ride kit, select that here.

Add Strut Mounts or Assembly?

Select if you'd like to add new strut mounts only, or also have the coils and struts assembled prior to shipping

Add front UCA's?

New UCA's will correct the geometry of the alignment by allowing addition caster and camber correction. These are recommended when running IMS front struts

Add Rear Bump Stops?

These tie into the u-bolts to replace the factory bump stop and provide a progressive rate bump, much more comfortable during a bottom-out

Add New CV Boots?

Since these trucks are pretty old now and you'll be replacing the suspension already, consider replacing the CV boots while you're in there

SKU: 1STGENTACOIMSKIT Categories: Dobinsons, Full Suspension Kits, Full Suspension Kits - Tacoma 1st Gen, Suspension, Tacoma 1st Gen (1996-2004) Tags: 1st gen, ims59-50222, Quick Ride, taco, tacoma Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons offer this complete 2.0″ IMS suspension system for the 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models, designed to give a great ride front and rear, for vehicles looking for lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2″ lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end.

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

1996 Toyota Tacoma Lift Kit
1997 Toyota Tacoma Lift Kit
1998 Toyota Tacoma Lift Kit
1999 Toyota Tacoma Lift Kit
2000 Toyota Tacoma Lift Kit
2001 Toyota Tacoma Lift Kit
2002 Toyota Tacoma Lift Kit
2003 Toyota Tacoma Lift Kit
2004 Toyota Tacoma Lift Kit