Your cart is currently empty!
Sale!
Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996-2002
- Suits 3rd Gen 4Runner 1996-2002 4×4 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Teal, Red or Black coils in the selections below
From $1,200.00
In StockSelect Front Coils
Select the coils that match the weight on the front of your vehicle
C59-276 - 2" lift light to medium load (Teal or Black ONLY)
C59-134 - 2" lift heavy load (110-220LBS) (all 3 colors)
C59-238 - 2.5" lift heavy load (110-220LBS) (all 3 colors)
C59-276 - 2" lift light to medium load (Teal or Black ONLY)
C59-134 - 2" lift heavy load (110-220LBS) (all 3 colors)
C59-238 - 2.5" lift heavy load (110-220LBS) (all 3 colors)
Select Front Struts
Select Rear Coils
C59-131 - 2" lift Light to Medium Load
C59-137V - 2" lift variable rate light to heavy loads up to 220lbs
C59-297V - 2" lift variable rate for heavy constant loads of 330LBS+ (TEAL ONLY)
C59-303R - 2" lift with 600-800lb constant rear load (RED ONLY)
C59-137V - 2" lift variable rate light to heavy loads up to 220lbs
C59-297V - 2" lift variable rate for heavy constant loads of 330LBS+ (TEAL ONLY)
C59-303R - 2" lift with 600-800lb constant rear load (RED ONLY)
Select Rear Shocks
Select Coil Spring Color for Front and Rear
Select your preferred color. If that is not available, we will reach out to you with an ETA or other color options. C59-276 are only made in Teal or Black
Add Strut Mounts?
Here you can add new strut mounts and hardware so that you don't have to disassemble your old struts
Add Strut Assembly?
Labor charge to assemble struts, coils and new top mounts together before shipping. **Requires SC59-002 mounts to be ordered as well!!
Add Front Lean Correction Spacer?
Older trucks tend to be lower on the driver side, add this spacer during installation to level the front from left to right
Add a Diff Drop KIt?
A diff drop kit rotates and lowers the front of the differential to reduce the CV angle for reduced wear and also better CV boot angle, so that the bellows don't rub against each other so bad
Add Front UCA's?
New front upper control arms (UCA's) help get the best possible alignment on a lifted vehicle and also set you up with all new parts without worrying about the condition of the old used arms, bushings and ball joints. These are required when running Dobinson IMS front struts due to the added down travel.
Add Airbags?
If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Add Front Bump Stops?
Bump stops play a vital roll in controlling the bottom out of a vehicle, and worn out bump stops just won't do the trick. New bump stops soften the bottom out considerably and add control and comfort to the driving experience.
Add Rear Bump Stops?
Bump stops play a vital roll in controlling the bottom out of a vehicle, and worn out bump stops just won't do the trick. New bump stops soften the bottom out considerably and add control and comfort to the driving experience.
Add Front Brake Lines?
Replacement brake lines aren't required for the front of this vehicle, however adding stainless braided brake lines will increase the pedal feel and braking performance
Add New CV Boots?
Given the age of the 4Runner, if you're already replacing the front suspension, you may want to replace all the CV boots at the same time
SKU: 4RUN3RDGENKIT
Categories: 4Runner 3rd Gen (1996-2002), Dobinsons, Full Suspension Kits, Full Suspension Kits - 3rd Gen 4Runner, Suspension
Tags: c59-131, c59-134, c59-137v, c59-276
Brand: Dobinsons Spring & Suspension
Description
Dobinsons offer this complete 2.0-2.5″ suspension system for the 1996 to 2002 3rd Gen 4Runner models (also known as Hilux Surf) with the gas engine looking to freshen up their suspension as well as add ground clearance.
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
1996 Toyota 4Runner Lift Kit
1997 Toyota 4Runner Lift Kit
1998 Toyota 4Runner Lift Kit
1999 Toyota 4Runner Lift Kit
2000 Toyota 4Runner Lift Kit
2001 Toyota 4Runner Lift Kit
2002 Toyota 4Runner Lift Kit
13 reviews for Dobinsons 2-2.5″ Lift Kit for Toyota 4Runner 1996-2002
You must be logged in to post a review.
Related products
-
Sale!80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- c59-309 – 4″ lift with 110-220lbs weight
- c59-313 – 4″ lift with 400-750lbs weight
- c59-317 – 6″ lift with stock weight
- c59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
Sale!Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
Sale!Exceptions
Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews)
Charles (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Robert (verified owner) –
It’s exactly what I wanted.
Scott (verified owner) –
Very good customer service, super friendly.
Kevin (verified owner) –
Just what I needed.
Jacob (verified owner) –
Just what I needed.
Anthony (verified owner) –
Value for money, super satisfied.
Jesse (verified owner) –
It’s exactly what I wanted.
Richard (verified owner) –
This is my go-to now for off road parts.
Matthew (verified owner) –
*****
Jeffrey (verified owner) –
Very good customer service, super friendly.
William (verified owner) –
*****
Jeffrey (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Jose (verified owner) –
Value for money, super satisfied.